Chevrolet, Cadillac and 2 others engineering analysis EA26006
Electronic Brake Module Component Failure. NHTSA’s Office of Defects Investigation opened this engineering analysis about the service brakes on 33 model years (2023–2026). Opened Aug 21, 2026 and still open — 30 days so far, against NHTSA’s goal of eighteen months for a engineering analysis. open
What NHTSA says
Source: Office of Defects Investigation, as filedOn April 11, 2024, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE24011 after receiving complaints concerning a loss of brake assist in 2023 MY Cadillac Lyriq vehicles. These complaints allege a hard brake pedal, followed by a “Brake System Failure� message at start up or while driving. GM shared records regarding several internal investigations for loss of brake assist due to alleged spindle fractures in the eBoost system. GM has stated that in the event of a spindle fracture, anti-lock brakes (ABS), stability control, and traction control remain functional until the vehicle comes to a complete stop. At this point, ABS, brake assist, stability control, and traction control functions are lost. The loss of these functions causes the vehicle to set one of three Diagnostic Trouble Codes (DTCs) based on failed performance criteria for the Electronic Brake Control Module (EBCM). These DTCs, in turn, activate several driver alerts: an audible chime, a visual “Service Brake System� message in the display, and multiple illuminated Malfunction Indicator Lights (MILs) for the ABS, Traction Control, and Brakes informing the driver of loss of functionality. The vehicle speed will also be limited to 70 KPH (43 MPH). Since opening PE24011, ODI has continued to receive reports of loss of brake assist. Some of these reports describe symptoms inconsistent with GM’s description of a spindle failure. These reports allege an immediate loss of brake assist functionality as opposed to the loss occurring after the vehicle comes to a complete stop. The sudden loss of brake assist during a braking event could result in extended braking distance, which increases the risk of a crash or injury. ODI believes further analysis is necessary to assess the potential for failures in GM’s eBoost system to resulting in safety-related outcomes. At this time, ODI is aware of the following vehicles that are equipped with this eBoost system: 2023-2026 MY Cadillac Lyriq, Chevrolet Colorado, and GMC Canyon; 2024-2026 MY Buick Enclave, Envision; Chevrolet Blazer EV, Equinox EV, Traverse; Cruise Origin; and GMC Acadia; 2025-2026 MY Cadillac Celestiq and Optiq. ODI is also aware of 2024-2026 MY Acura ZDX and 2024-2026 MY Honda Prologue vehicles that were built with this system. The Acura and Honda vehicles were manufactured by GM in a joint venture with Honda, and will be included in the Engineering Analysis as peer vehicles. ODI is opening this Engineering Analysis to further assess the safety-related consequences of a failed eBoost system. In addition, ODI is expanding the scope of the investigation to encompass all GM vehicles that share this eBoost system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
A Engineering Analysis is the deeper stage, usually upgraded from a Preliminary Evaluation: NHTSA tests, requests engineering documents and decides whether a safety defect exists. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one is open. Nothing is owed on the vehicle today; if it becomes a recall, owners are written to and the repair is free. The moment to know is the day the campaign number appears — Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, or take a free one-line alert by model year.
Model years it names
Source: as NHTSA filed themAlso named on model years this site has no page for: 2024 Cadillac Redundant Lyriq.
A vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs EA26006 a recall?
No. A engineering analysis is NHTSA asking questions, not a recall. A safety recall carries an NHTSA campaign number and a duty to repair for free; this one has not produced one. Whether one particular vehicle has an open recall is a VIN question at nhtsa.gov/recalls.
Is EA26006 still open?
Yes, as of NHTSA’s latest file: opened Aug 21, 2026, 30 days ago.
Which vehicles does EA26006 cover?
NHTSA opened it on 33 model years: 2026 Buick Enclave, 2025 Buick Enclave, 2024 Buick Enclave, 2026 Buick Envision, 2025 Buick Envision, 2024 Buick Envision and more. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.