P0302
282 owner reports and 806 manufacturer filings across 327 model years from Acura, Alfa Romeo, Audi, Buick and others.
Where P0302 shows up
Source: NHTSA manufacturer communications and complaintsShowing the 60 model years where P0302 appears most; it is on file for 327 in total.
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
What it gets filed under
When owners report it
miles, typically
Half of the 55 owner reports naming P0302 that carry an odometer reading fall between 63,000 and 95,000 miles. A code that shows up at 30,000 miles is a different proposition from one that shows up at 130,000, and that difference is the single most useful thing in this record.
What owners said
Source: NHTSA complaint databaseOwners’ own words, one per nameplate, scrubbed of anything identifying. These are unverified reports filed with NHTSA — they are what was said, not a finding that it was true.
The diagnostic scan showed P0172 (Fuel System Too Rich, Bank 1), P0300 (Random/Multiple Cylinder Misfire), P0301 (Cylinder 1 Misfire), P0302 (Cylinder 2 Misfire), and P0303 (Cylinder 3 Misfire)
Failure has been confirmed by two independent automotive facilities: Independent Confirmation: On XXX, ’s Service Center performed a diagnostic scan and an engine compression test, formally documenting diagnostic trouble code P030200…
The diagnostic trouble codes stored were P0217 (Engine Overheat Condition), P0302 (Cylinder 2 Misfire Detected), & P0316 (Misfire Detected on Startup)
Diagnostic trouble codes associated with these problems have included P000C, P219D, P219F, P21A0, and P0302
· Active Diagnostic Trouble Codes (DTCs) stored: P0017, P0014, P000B, P0172, P0300, P0301, P0302, P0303, P0304
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names P0302. Quoting the document number at a service desk is often the fastest route to a diagnosis someone has already written down.
- SSM 549482026-06-18 · Unknown Or Other
- Some 2025-2026 Explorer/Aviator/Police Interceptor Utility non-hybrid vehicles built on 06-Feb-2025 and through 13-Dec-2025 may exhibit various drivability symptoms including a rough idle or hesitation shortly after refueling. These symptoms may also be accompanied by liquid fuel in the fuel vapor lines and fuel vapor canister as well as an illuminated malfunction indicator lamp (MIL) with diagnos
- 18-035-26 REV. A2026-06-13 · Power Train
- Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: â—� P0300 - Multiple Cylinder Misfire. â—� P0301 - Cylinder 1 Misfire. â—� P0302 - Cylinder 2 Misfire. â—� P0303 - Cylinder 3 Misfire. â—� P0304 - Cyli
- 18-008-26 REV. B2026-06-10 · Engine
- Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): â—� **P0300 - Multiple Cylinder Misfire (Active or Stored status set during cold start catalyst heating). â—� P0301 - Cylinder 1 Misfire (Active or Stored status set during cold start
- TSB 26-22102026-05-28 · Power Train
- Some of the vehicles listed in the Model statement above may exhibit all of the following conditions: * Engine misfire condition * Illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0301, P0302, P0303, and/or P0304 stored in the powertrain control module (PCM)
- 18-051-262026-04-18 · Engine
- Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** â—� **P0300 - Multiple Cylinder Misfire - In Active or Stored status set during cold start catalyst heating. â—� P0301 - Cylinder 1 Misfire - In Active or Stored status se
- 18-049-262026-04-18 · Power Train
- Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): â—� **P0300 - Multiple Cylinder Misfire - In Active or Stored status set during cold start catalyst heating. â—� P0301 - Cylinder 1 Misfire - In Active or Stored status set du
What P0302 means
Source: SAE J2012 / OBD-IICylinder 2 is misfiring.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about P0302
Source: NHTSA files and the OBD-II standardCan I keep driving with P0302 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light generally means the fault was logged and the vehicle is in a reduced-risk mode; a flashing light means stop soon, because a misfiring engine can destroy a catalytic converter in minutes. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.