B2B0E
0 owner reports and 82 manufacturer filings across 25 model years from Chevrolet, GMC.
Where B2B0E shows up
Source: NHTSA manufacturer communications and complaintsA model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.
B2B0E by make
The same record, one make at a time: the model years, bulletins and owner reports that name B2B0E on that maker’s vehicles.
What it gets filed under
82 manufacturer filings name B2B0E. Start with what the maker wrote down.
A code names the test that failed, not the part. A bulletin that names it is often a diagnosis someone has already written down — quote its number at the service desk.
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names B2B0E.
- PIT5743D Service bulletin2024-01-09 · Electrical System
- This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
- PIT5743C Service bulletin2023-01-12 · Electrical System
- This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
- PIT5743A Service bulletin2021-08-16 · Electrical System
- This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
- PIT5743 Service bulletin2020-04-30 · Electrical System
- This Preliminary information communicates diagnostic tips when trying to root cause a SES MIL with DTC's B2B0D and B2B0E. Main cause is aftermarket electrical devices spliced into the ignition main fuses.
- PIE0546A Service bulletin2020-03-26 · Electrical System
- This engineering information (EI) is requesting information from the field on conditions of Service Engine Soon (SES) Lamp Illuminated, DTCs B2B0D and/or B2B0E Central Gateway Module Codes Unable to Communicate with HSLAN or LSLAN. Eng is attempting to root cause condition and validate a field fix.
- PIE0546 Service bulletin2019-11-20 · Electrical System
- This engineering information (EI) bulletin is requesting information from the field on conditions of Service Engine Soon (SES) Lamp Illuminated, DTCs B2B0D and/or B2B0E Central Gateway Module Codes Unable to Communicate with HSLAN or LSLAN. Eng is attempting to root cause condition and validate a field fix.
What B2B0E means
Source: SAE J2012 / OBD-IIB2B0E sits in the generic range of the OBD-II standard, so it means the same thing on every vehicle sold in the United States — but WhichTrim does not carry a definition for it and will not invent one. What is on this page is the record: who named it and on what.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about B2B0E
Source: NHTSA files and the OBD-II standardCan I keep driving with B2B0E stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.