B1088
0 owner reports and 11 manufacturer filings across 8 model years from Ford, Lincoln.
Where B1088 shows up
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports |
|---|---|---|---|
| 2016 Lincoln MKX | Electrical System | 3 | — |
| 2019 Lincoln MKC | Visibility | 2 | — |
| 2022 Ford Bronco Sport | Unknown Or Other | 1 | — |
| 2021 Ford Bronco Sport | Unknown Or Other | 1 | — |
| 2022 Ford Escape | Electrical System | 1 | — |
| 2022 Ford Maverick | Structure | 1 | — |
| 2022 Lincoln Corsair | Unknown Or Other | 1 | — |
| 2021 Lincoln Corsair | Electrical System | 1 | — |
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
What it gets filed under
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names B1088. Quoting the document number at a service desk is often the fastest route to a diagnosis someone has already written down.
- SSM 504582022-02-02 · Unknown Or Other
- Some 2020-2021 Explorer/Aviator/Escape/Corsair, 2021-2022 Bronco Sport, and 2022 Maverick vehicles may exhibit an inoperative driver door window control switch (windows inoperative, mirror control unresponsive, etc.). Diagnostic trouble code (DTC) B1088:87 may be present in the driver door module (DDM). This may be due to the software in the DDM. To correct the condition, reprogram the DDM with th
- TSB 19-20922019-03-25 · Electrical System
- Some 2019 MKC vehicles built on 23-Jul-2018 and through 07-Nov-2018 may exhibit intermittent function of the power mirrors and/or power windows from the master switch. These symptoms may also be present with or without diagnostic trouble codes (DTCs) B1087 and/or B1088 stored in the driver door module (DDM) and/or passenger door module (PDM). This may be the result of a small impression in the lef
- TSB 19-20722019-03-08 · Visibility — Power Window Devices And Controls
- Some 2019 MKC vehicles built on 23-Jul-2018 and through 07-Nov-2018 may exhibit intermittent function of the power mirrors and/or power windows from the master switch. These symptoms may also be present with or without diagnostic trouble codes (DTCs) B1087 and/or B1088 stored in the driver door module (DDM) and/or passenger door module (PDM). This may be the result of a small impression in the lef
- SSM 459832016-08-09 · Exterior Lighting — Headlights
- SOME 2016 MKX VEHICLES BUILT ON OR BEFORE 8/5/2016 MAY DISPLAY A CHECK HEADLAMP MESSAGE IN THE INSTRUMENT CLUSTER MESSAGE CENTER WITH DIAGNOSTIC TROUBLE CODE (DTC) B1087 AND/OR B1088 PRESENT IN THE HEADLAMP CONTROL MODULE (HCM). TO CORRECT THE CONDITION, UPDATE THE HCM TO THE LATEST LEVEL CALIBRATION USING IDS VERSION 101.03 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODU
- SSM 459492016-07-25 · Electrical System
- SOME 2016 MKX VEHICLES MAY DISPLAY A CHECK HEADLAMP MESSAGE IN THE INSTRUMENT CLUSTER MESSAGE CENTER WITH DIAGNOSTIC TROUBLE CODE (DTC) B1087 AND/OR B1088 PRESENT IN THE HEADLAMP CONTROL MODULE (HCM). TO CORRECT THE CONDITION, UPDATE THE HCM TO THE LATEST LEVEL CALIBRATION USING IDS VERSION 101.03 OR HIGHER. MAKE SURE YOU ARE CONNECTED TO THE INTERNET WHEN ENTERING MODULE PROGRAMMING TO OBTAIN THE
- SSM 459252016-07-13 · Electrical System
- SOME 2016 MKX VEHICLES MAY DISPLAY A CHECK HEADLAMP MESSAGE IN THE INSTRUMENT CLUSTER MESSAGE CENTER WITH DIAGNOSTIC TROUBLE CODES (DTCS) B1087 AND/OR B1088 PRESENT IN THE HEADLAMP CONTROL MODULE (HCM). THIS CONCERN IS CURRENTLY UNDER INVESTIGATION. CONTINUE TO MONITOR OASIS FOR UPDATES.
What B1088 means
Source: SAE J2012 / OBD-IIB1088 is a manufacturer-specific code: the second character is a 1, which under the OBD-II standard hands the definition to whoever built the vehicle. The same code can mean one thing on a Ford and something unrelated on a Hyundai. Any site that prints a single definition for it is guessing.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about B1088
Source: NHTSA files and the OBD-II standardWhy does this page not define B1088?
Because it cannot be defined honestly. The second character of a trouble code says who owns its meaning, and a 1 or a 3 hands that to the manufacturer. Sites that print one definition for a manufacturer-specific code are showing you one automaker's meaning and hoping it is yours.
Can I keep driving with B1088 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light generally means the fault was logged and the vehicle is in a reduced-risk mode; a flashing light means stop soon, because a misfiring engine can destroy a catalytic converter in minutes. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.