⌘K
Federal filingsHome›Trouble codes› P2859
Diagnostic trouble code

P2859

5 owner reports and 15 manufacturer filings across 8 model years from Nissan.

Powertrain Generic OBD-II code 15 manufacturer filings 5 owner reports

Where P2859 shows up

Source: NHTSA manufacturer communications and complaints
Model yearFiled underBulletinsOwner reportsParts
2019 Nissan KicksPower Train4—
2018 Nissan KicksPower Train4—
2020 Nissan VersaPower Train31
2020 Nissan KicksPower Train21
2016 Nissan SentraPower Train—2
2021 Nissan KicksPower Train1—
2018 Nissan SentraPower Train—1
2021 Nissan VersaPower Train1—

A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.

Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.

P2859 by make

The same record, one make at a time: the model years, bulletins and owner reports that name P2859 on that maker’s vehicles.

Nissan 8

What it gets filed under

Power Train 17 Equipment 1 Equipment Adaptive/Mobility 1 Engine 1

What owners said

Source: NHTSA complaint database

Owners’ own words, one per nameplate, scrubbed of anything identifying. These are unverified reports filed with NHTSA — they are what was said, not a finding that it was true.

A diagnostic scan revealed active Diagnostic Trouble Codes DTC P17F0 (CVT Judder) and DTC P2859 (Clutch A Pressure)
2020 Nissan Kicks Sep 26, 2026 NHTSA owner report
The check engine light code was a P2859 issues with the Power Tran transmission
2016 Nissan Sentra Mar 16, 2025 NHTSA owner report
Check engine light came on went and got a diagnostics and P2859 and when i looked it up on google Nissan has had recalls in the past on the same thing
2020 Nissan Versa Jul 6, 2021 NHTSA owner report

15 manufacturer filings name P2859. Start with what the maker wrote down.

A code names the test that failed, not the part. A bulletin that names it is often a diagnosis someone has already written down — quote its number at the service desk.

Photo: Compagnons / Unsplash

Manufacturer filings that name it

Source: NHTSA manufacturer communications

Service bulletins and campaigns whose filed summary names P2859.

What P2859 means

Source: SAE J2012 / OBD-II

P2859 sits in the generic range of the OBD-II standard, so it means the same thing on every vehicle sold in the United States — but WhichTrim does not carry a definition for it and will not invent one. What is on this page is the record: who named it and on what.

A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.

From here

Common questions about P2859

Source: NHTSA files and the OBD-II standard

Can I keep driving with P2859 stored?

Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.

Does a code mean the car is recalled?

No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.

Why do the counts here differ from other sites?

Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.

Will clearing the code fix it?

Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.