⌘K
Federal filingsHome›Recalls› 20V124000
NHTSA campaign 20V124000 · manufacturer recall W12

2018–2020 Jeep Gladiator Pickup and 1 other Jeep model: power train recall

The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash.

critical 33,237 vehicles affected 92% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture. Risk The overheated clutch components may increase the risk of a fire. Additionally, damage to other nearby components can result in debris falling onto the road or a loss of drive, increasing the risk of a crash. Fix Chrysler will notify owners, and dealers will reroute a wire harness and inspect the clutch system, and replace components as needed. The recall began April 30, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W12.

Reported to NHTSA Mar 3, 2020 by Chrysler (FCA US LLC), owners notified Apr 30, 2020.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

The overheating clutch pressure plate can fracture and cause a fire, and debris/loss of drive can cause a crash, with fire risk being the primary driver for the critical classification.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Not stated in the dealer documents
Remedy Instructions filed: the dealer bulletin exists

Parts named

Part numberDescriptionQty
04318080ADFluid, Brake DOT 3 (MS-4574)
05083149AAGrease, Clutch Spline, Clutch Fork Pivot (MS-6560)

Special tools

  • are required to perform this repair  NPN Tool, Flywheel Locking 10272
  •  LSLMV8500 Kit, Vacuum Hand Pump

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign W12). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 20V124000
Model yearClassSafety SignalRecalls on file
2020 Jeep Gladiator PickupLarge Pickup truckF7
2018 Jeep WranglerCompact SUVF14
2019 Jeep WranglerCompact SUVF9
2020 Jeep WranglerCompact SUVF13

Those are the model years inside WhichTrim's range, 2016 onward. The campaign may cover others outside it, and the only thing that settles whether one specific vehicle is included is its VIN.

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 92%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 20V124000 · the manufacturer calls it W12

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is W12 the same recall as 20V124000?

Yes. W12 is the number Chrysler (FCA US LLC) uses for this campaign in its own paperwork and in the letter it sends owners. 20V124000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.