Jeep preliminary evaluation PE19008
Seat belt buckle bracket failure. NHTSA’s Office of Defects Investigation opened this preliminary evaluation about the buckle assembly on 8 model years (2011–2018). Opened Jul 29, 2019, closed Dec 12, 2019 after 4 months. It led to safety recall 19V680000. became a recall
What NHTSA says
Source: Office of Defects Investigation, as filedOn July 17, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-008 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging the driver's side seat belt buckle separated from the seat frame, rendering the seat belt non-functional. The VOQs involved model year (MY) 2015 and 2016 Jeep Wrangler (JK platform) that were configured for right-hand drive (RHD) use. On August 8, 2019, ODI issued an information request (IR) letter to FCA. The scope of the IR included all JK Wrangler produced for sale in the U.S. (both left- and right-hand drive), and amongst other things, requested any reports or allegations of driver's seat belt bracket failures on these vehicles. In its review of FCA's response, ODI determined that approximately 1.7 million JK Wrangler were produced from MY 2007 to 2018, about 16,000 of which were configured for RHD. ODI notes that the RHD Wrangler are typically used for rural postal delivery which often experience a more severe duty cycle. Also RHD JK was was not produced in MY 2007. As explained in the IR response, FCA identified three distinct populations of JK Wrangler concerning the driver's seat belt bucket bracket; specifically the MY 2007-2018 LHD (~1.7M units), the MY 2008-2010 RHD (4,563 units), and the MY 2011-2018 RHD (11,463 units) populations. FCA provided details on the designs used in each of these populations, identifying specific differences deemed pertinent to the strength and durability of each unique bracket design. FCA further reviewed its analysis of the complaint and warranty data identified under the IR, and noting that it had not identified any allegations of bracket failures on the LHD population, and only one allegation on the MY 2008-2010 RHD vehicles. By comparison, FCA identified 24 allegations of bracket failure for the MY 2011-2018 RHD JK, including two reports duplicative of the VOQs. Neither the FCA nor the VOQ reports allege an injury or fatality due to bracket failure. Based on this analysis, FCA decided to conduct a safety recall for the MY 2011-2018 RHD JK population. On September 30, 2019, FCA submitted a Defect Information Report initiating NHTSA Safety Recall 19V-680 (FCA No. VA6). Under the recall action, FCA will replace the driver's seat belt bracket on MY 2011-2018 RHD Jeep JK Wrangler. The repair will be conducted free of charge. In view of FCA's recall action, and its explanations of the scope of that action, ODI is closing PE19-008. ODI will continue to monitor the non-recalled RHD, and the LHD JK Wrangler for evidence of seat belt bracket failure and will take further action if warranted. The three VOQ reports cited above can be reviewed at NHTSA.gov under the following reference numbers:11190251, 11218472, 11231639.
A Preliminary Evaluation is the first formal stage: NHTSA has decided the complaints and other information it screened are worth a closer look, and asks the manufacturer for its own data on the condition. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one became a recall. The campaign page carries the manufacturer’s filed defect, risk and remedy, the build window and every model year covered; whether one specific vehicle is included is settled by VIN at nhtsa.gov/recalls.
Model years it names
Source: as NHTSA filed themAlso named on model years this site has no page for: 2011 Jeep Wrangler; 2012 Jeep Wrangler; 2013 Jeep Wrangler; 2014 Jeep Wrangler; 2015 Jeep Wrangler.
A vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs PE19008 a recall?
No — it is the investigation that led to one. Recall 19V680000 is the campaign; its page carries the remedy.
Is PE19008 still open?
No. It closed on Dec 12, 2019 and led to recall 19V680000.
Which vehicles does PE19008 cover?
NHTSA opened it on 8 model years: 2018 Jeep Wrangler, 2017 Jeep Wrangler, 2016 Jeep Wrangler, 2011 Jeep Wrangler, 2012 Jeep Wrangler, 2013 Jeep Wrangler and more. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.