⌘K
Federal filingsHome›Trouble codes› P0405
Diagnostic trouble code

P0405

1 owner report and 12 manufacturer filings across 5 model years from Hyundai, Kia, Ram.

Powertrain Generic OBD-II code 12 manufacturer filings 1 owner report

Where P0405 shows up

Source: NHTSA manufacturer communications and complaints
Model yearFiled underBulletinsOwner reportsParts
2024 Hyundai SonataEngine4—
2024 Hyundai TucsonEngine4—
2017 Ram 2500Power Train2—
2017 Ram 3500Power Train2—
2024 Kia SorentoEngine—1

A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.

Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.

What it gets filed under

Engine 9 Power Train 4

12 manufacturer filings name P0405. Start with what the maker wrote down.

A code names the test that failed, not the part. A bulletin that names it is often a diagnosis someone has already written down — quote its number at the service desk.

Photo: Compagnons / Unsplash

Manufacturer filings that name it

Source: NHTSA manufacturer communications

Service bulletins and campaigns whose filed summary names P0405.

What P0405 means

Source: SAE J2012 / OBD-II

P0405 sits in the generic range of the OBD-II standard, so it means the same thing on every vehicle sold in the United States — but WhichTrim does not carry a definition for it and will not invent one. What is on this page is the record: who named it and on what.

A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.

From here

Common questions about P0405

Source: NHTSA files and the OBD-II standard

Can I keep driving with P0405 stored?

Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.

Does a code mean the car is recalled?

No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.

Why do the counts here differ from other sites?

Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.

Will clearing the code fix it?

Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.