B1176
0 owner reports and 4 manufacturer filings across 2 model years from Ford, Lincoln.
Where B1176 shows up
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports | Parts |
|---|---|---|---|---|
| 2022 Lincoln Aviator | Structure | 3 | — | |
| 2024 Ford F-150 | Latches/Locks/Linkages | 1 | — | Door lock actuator → |
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.
What it gets filed under
4 manufacturer filings name B1176. Start with what the maker wrote down.
A code names the test that failed, not the part. A bulletin that names it is often a diagnosis someone has already written down — quote its number at the service desk.
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names B1176.
- SSM 52468 Service bulletin2024-04-23 · Latches/Locks/Linkages
- Some 2021-2024 F-150 vehicles may exhibit a side door ajar and/or a hood ajar warning message displayed in the instrument panel cluster (IPC) with or without diagnostic trouble codes (DTC) P166B, B1175, B1176, B11C1 and/or B11C0. This may be due to a misalignment of the the door or hood and/or their strikers. Before attempting any component diagnosis or replacement, check the door and/or hood and
- SSM 51788 Service bulletin2023-07-14 · Structure — Body — Door
- Some 2020-2023 Aviator vehicles built on or before 12-Oct-2022 may exhibit a door ajar or door fault warning message present in the message center with diagnostic trouble codes (DTCs) B1175:19, B1176:19, B11C0:19 and/or B11C1:19 present in door latch control module E (DCME), door latch control module F (DCMF), door latch control module G (DCMG) and/or door latch control module H (DCMH). This may b
- SSM 50967 Service bulletin2022-07-27 · Latches/Locks/Linkages — Doors — Latch
- Some 2020-2022 Aviator vehicles may exhibit a door ajar or door fault warning message present in the message center with diagnostic trouble codes (DTCs) B1175:19, B1176:19, B11C0:19 and/or B11C1:19 present in door latch control module E (DCME), door latch control module F (DCMF), door latch control module G (DCMG) and/or door latch control module H (DCMH). This may be due to low battery voltage an
- SSM 50556 Service bulletin2022-03-03 · Structure — Body — Door
- Some 2020-2022 Aviator vehicles may exhibit a door ajar or door fault warning message present in the message center with diagnostic trouble codes (DTCs) B1175:19, B1176:19, B11C0:19 and/or B11C1:19 present in door latch control module E (DCME), door latch control module F (DCMF), door latch control module G (DCMG) and/or door latch control module H (DCMH). This may be due to low battery voltage an
What B1176 means
Source: SAE J2012 / OBD-IIB1176 is a manufacturer-specific code: the second character is a 1, which under the OBD-II standard hands the definition to whoever built the vehicle. The same code can mean one thing on a Ford and something unrelated on a Hyundai. Any site that prints a single definition for it is guessing.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about B1176
Source: NHTSA files and the OBD-II standardWhy does this page not define B1176?
Because it cannot be defined honestly. The second character of a trouble code says who owns its meaning, and a 1 or a 3 hands that to the manufacturer. Sites that print one definition for a manufacturer-specific code are showing you one automaker's meaning and hoping it is yours.
Can I keep driving with B1176 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.