B1082
0 owner reports and 10 manufacturer filings across 3 model years from Ford, Mazda.
Where B1082 shows up
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports |
|---|---|---|---|
| 2020 Ford Ranger | Visibility | 4 | — |
| 2019 Ford Ranger | Electrical System | 4 | — |
| 2024 Mazda CX-90 | Unknown Or Other | 2 | — |
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
What it gets filed under
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names B1082. Quoting the document number at a service desk is often the fastest route to a diagnosis someone has already written down.
- 07-002-24a2024-12-12 · Unknown Or Other
- Some customers may experience that the air conditioning system stops working. Upon inspection, DTC B1082:19 [DASH_ESU] (Air mix actuator (RH) circuit malfunction) is stored in memory. DTC B1082:19 is stored as a past malfunction and continues in one drive cycle, then returns normal at the next drive cycle. Due to the electrical noise caused when the air mix actuator is driven too quickly, a false
- 07-002-242024-02-05 · Unknown Or Other
- Some customers may experience that the air conditioning system stops working. Upon inspection, DTC B1082:19 [DASH_ESU] (Air mix actuator (RH) circuit malfunction) is stored in memory. DTC B1082:19 is stored as a past malfunction and continues in one drive cycle, then returns normal at the next drive cycle. Due to the electrical noise caused when the air mix actuator is driven too quickly, a false
- SSM 506292022-03-23 · Visibility — Defroster/Defogger/Hvac System
- Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue
- SSM 500832021-09-03 · Engine And Engine Cooling — Engine — Oil/Lubrication — Pressure/Temperature Sensor
- Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue
- SSM 492642020-10-15 · Equipment Adaptive/Mobility
- Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue
What B1082 means
Source: SAE J2012 / OBD-IIB1082 is a manufacturer-specific code: the second character is a 1, which under the OBD-II standard hands the definition to whoever built the vehicle. The same code can mean one thing on a Ford and something unrelated on a Hyundai. Any site that prints a single definition for it is guessing.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about B1082
Source: NHTSA files and the OBD-II standardWhy does this page not define B1082?
Because it cannot be defined honestly. The second character of a trouble code says who owns its meaning, and a 1 or a 3 hands that to the manufacturer. Sites that print one definition for a manufacturer-specific code are showing you one automaker's meaning and hoping it is yours.
Can I keep driving with B1082 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light generally means the fault was logged and the vehicle is in a reduced-risk mode; a flashing light means stop soon, because a misfiring engine can destroy a catalytic converter in minutes. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.