⌘K
Federal filingsHome›Recalls› 22V154000
NHTSA campaign 22V154000 · manufacturer recall Z18

2021–2022 Dodge and Jeep: steering recall

Difficulty steering, or a loss of steering control, can increase the risk of a crash.

high 931 vehicles affected 89% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango and 2022 Jeep Grand Cherokee vehicles. The steering gear rack bar may have been insufficiently hardened during manufacturing, possibly allowing it to bind within the steering rack, and resulting in difficulty steering or a loss of steering control. Risk Difficulty steering, or a loss of steering control, can increase the risk of a crash. Fix Dealers will replace the steering gear assembly, free of charge. Owner notification letters were mailed on May 12, 2022. Owners may contact FCA US, LLC customer service at 1-800-852-1403. FCA US, LLC's number for this recall is Z18.

Reported to NHTSA Mar 14, 2022 by Chrysler (FCA US, LLC), owners notified May 12, 2022.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

Insufficient hardening of the rack bar may cause it to bind, resulting in difficulty steering or loss of steering control, which directly threatens crash avoidance but no stop-drive order was issued and the filing uses hedged language ('possibly allowing').

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Not stated in the dealer documents
Remedy Instructions filed: the dealer bulletin exists

Parts named

Part numberDescriptionQty
06510206AAPinch Bolt
06511398AANut, Upper Ball Joint
06512099AAClevis Nut
06512111AAClevis Bolt
04809863ACWasher, Half Shaft Outer
06102240AABolt and Washer
06104717AANut, Lock (axle tube bushing bracket bolt and nut)
06509298AANut, Axle Half Shaft to hub and bearing
06511930AABolt, Front axle differential
68087448ACBolt kit, front prop to pinion flange
06512761AARivet, Spat Attaching – (WD only as applicable)

Special tools

  • are required to perform this repair ➢ 9360 Remover, Tie Rod
  • ➢ 8984C Fixture
  • ➢ 8534C Driveline Support or Equivalent
  • ➢ C-4150A Press, Ball Joint
  • ➢ 10270 Protector, Half Shaft, Drive
  • ➢ 8677 Ball Joint Remover
  • Special Tools Safety Recall Z18 – Steering Gear Page 4 A. Removal 1. Disconnect and isolate the negative battery cable 2
  • 8534C or equivalent (Figure 1)

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign Z18). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 22V154000
Model yearClassSafety SignalRecalls on file
2021 Dodge DurangoLarge SUVD8
2022 Dodge DurangoLarge SUVD7
2022 Jeep Grand CherokeeLarge SUVF24

Those are the model years inside WhichTrim's range, 2016 onward. The campaign may cover others outside it, and the only thing that settles whether one specific vehicle is included is its VIN.

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 89%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 22V154000 · the manufacturer calls it Z18

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is Z18 the same recall as 22V154000?

Yes. Z18 is the number Chrysler (FCA US, LLC) uses for this campaign in its own paperwork and in the letter it sends owners. 22V154000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.