⌘K
HomeRecalls18V536000
NHTSA campaign 18V536000

2017–2018 Volkswagen Atlas and 1 other Volkswagen model: service brakes, hydraulic recall

The loose brake bracket bolts can allow the caliper to move, reducing braking ability or causing a loss of vehicle control and increasing the risk of a crash.

high8,416 vehicles affected96% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
ProblemVolkswagen Group of America, Inc. (Volkswagen) is recalling certain 2018 Volkswagen Atlas and 2017-2018 Volkswagen Passat vehicles. The brake caliper bracket mounting bolts on these vehicles may not have been tightened sufficiently.RiskThe loose brake bracket bolts can allow the caliper to move, reducing braking ability or causing a loss of vehicle control and increasing the risk of a crash.FixVolkswagen will notify owners, and dealers will inspect the brake caliper bracket bolt tightness, replacing and re-torque the bolts as necessary, free of charge. Additionally brake caliper fasteners, bleeder valve, and brake hose bolts will be checked and torqued to the correct specification, if necessary, free of charge. For Passat vehicles, dealers will also inspect the parking brake cable for proper connection, free of charge. The recall began September 14, 2018. Owners may contact Volkswagen customer service at 1-800-893-5298. Volkswagen's number for this recall is 46H6.

Reported to NHTSA Aug 15, 2018 by Volkswagen Group of America, Inc, owners notified Sep 13, 2018.

Which vehicles are covered

Source: NHTSA campaign 18V536000

Vehicles built Oct 26, 2016 to Jun 12, 2018 — a VIN outside that window is not part of this campaign even if the year, make and model match.

Model yearClassSafety SignalRecalls on file
2018 Volkswagen AtlasCompact SUVF16
2017 Volkswagen PassatMidsize SedanF7
2018 Volkswagen PassatMidsize SedanD4

Those are the model years inside WhichTrim's range, 2016 onward. The campaign may cover others outside it, and the only thing that settles whether one specific vehicle is included is its VIN.

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired96%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Filed documents

NHTSA has not published the scanned filings for this campaign, or has not published them yet. The campaign record itself is on their site.

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. NHTSA checks a VIN against the manufacturer's own list and tells you whether the repair is still outstanding on that vehicle.

NHTSA VIN recall lookup →

Campaign 18V536000 · the manufacturer calls it 46H6

Common questions

Source: NHTSA, 49 CFR Part 573

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. This campaign covers vehicles built Oct 26, 2016 to Jun 12, 2018. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.