Ram preliminary evaluation PE21021
High pressure fuel pump failure. NHTSA’s Office of Defects Investigation opened this preliminary evaluation about the fuel pump on 8 model years (2019–2020). Opened Oct 14, 2021, closed Apr 14, 2023 after 18 months without a recall. closed
What NHTSA says
Source: Office of Defects Investigation, as filedThe Office of Defects Investigation (ODI) opened PE21-021 on October 14, 2021 to investigate allegations of stall/loss of motive power as a result of high pressure fuel pump failures in certain model year (MY) 2019-2020 RAM 2500, 3500, 4500, and 5500 heavy duty trucks equipped with 6.7L Cummins turbodiesel engines. On November 12, 2021, FCA filed vehicle recall 21V-880 and equipment recall 21E-094 on the subject population, identifying an `internally failed component? of the high pressure fuel pump equipped on the 6.7L Cummins Turbodiesel engine that introduced debris into the fuel system potentially causing fuel starvation and consequently an unexpected loss of motive power. Discussions with FCA identified the high pressure fuel pump equipped on these vehicles as the Bosch-supplied CP4. On December 16, 2021, Bosch filed recall 21E-101, stating the pump failure was a consequence of a manufacturer application-specific fuel system design. NHTSA subsequently identified recall 21V-586 involving loss of motive power due to failed CP4 fuel pumps on certain BMW vehicles. As a result of having received multiple recalls related to a common component, from two separate vehicle manufacturers, NHTSA?s focus shifted to determine if the related defect allegation was limited in scope to the recalled population. In early 2022, information request letters were sent to FCA and BMW to determine the root cause and consequentially identify the proper scope of potentially defective vehicles. After ODI received their information request response, FCA filed recalls 22V-406, 22E-048, 22V-767, and 22E-087. During review of information request response materials, NHTSA determined that sufficient information to identify a comprehensive recall population could not be produced by FCA or BMW. On March 17, 2023, this Preliminary Evaluation was upgraded to an Engineering Analysis (EA23-001), expanding the scope to include the Tier-one supplier and any manufacturer who equipped or installed similar high pressure fuel pumps subject to the failures observed in the recall population. The ODI reports cited above can be reviewed at: http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID using the following complaint identification numbers: 11351441, 11361603, 11361616, 11365300, 11365426, 11365858, 11366401, 11372337, 11373793, 11374797, 11376793, 11378173, 11384377, 11386063, 11387018, 11399710, 11402550, 11415339, 11418868, 11418870, 11427075, 11434276, 11436807, 11437226, 11437249, 11437273, 11437292, 11437294, 11437394, 11437399, 11437403, 11437405, 11437423, 11437528, 11437565, 11437579, 11437580, 11437590, 11437679, 11437744, 11437781, 11437842, 11437993, 11438006, 11438008, 11438121, 11438138, 11438155, 11438392, 11438629, 11439359, 11439879, 11440397, 11443030, 11448163, 11458918, 11460558
A Preliminary Evaluation is the first formal stage: NHTSA has decided the complaints and other information it screened are worth a closer look, and asks the manufacturer for its own data on the condition. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one closed without a recall. That means NHTSA found no defect trend it chose to act on at the time, or the manufacturer addressed the condition another way (a service campaign or a bulletin, which have their own pages). A closed file can be reopened if new reports arrive.
Model years it names
Source: as NHTSA filed themAlso named on model years this site has no page for: 2019 Ram 4500; 2020 Ram 4500; 2019 Ram 5500; 2020 Ram 5500.
A vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs PE21021 a recall?
No. A preliminary evaluation is NHTSA asking questions, not a recall. A safety recall carries an NHTSA campaign number and a duty to repair for free; this one closed without one. Whether one particular vehicle has an open recall is a VIN question at nhtsa.gov/recalls.
Is PE21021 still open?
No. It closed on Apr 14, 2023 without a recall.
Which vehicles does PE21021 cover?
NHTSA opened it on 8 model years: 2020 Ram 2500, 2019 Ram 2500, 2020 Ram 3500, 2019 Ram 3500, 2019 Ram 4500, 2020 Ram 4500 and more. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.