Jeep preliminary evaluation PE19012
Frame weld deficiencies. NHTSA’s Office of Defects Investigation opened this preliminary evaluation about the steering on 2 model years (2018–2019). Opened Sep 16, 2019, closed Oct 29, 2023 after 4.1 years without a recall. closed
What NHTSA says
Source: Office of Defects Investigation, as filedOn September 16, 2019, the Office of Defects Investigation (ODI) granted Defect Petition DP18-004 and opened Preliminary Evaluation PE19-012 to investigate allegations of deficient frame welds and their potential safety related effects on 2018-2019 Jeep Wranglers. Due to a previous steering related recall that was caused by a misaligned weld on the front track bar (NHTSA Recall No. 18V-675), ODI decided to include reports of steering shimmy or wobble, loose steering, and steering stiction (loss of power steering) as part of this investigation and parent petition (DP18-004). ODI received information from the vehicle manufacturer Fiat Chrysler Automobiles (FCA) via information request letters dated March 8, 2019, and February 6, 2020. Supplemental requests for information occurred between July 2020 and July 2023. A review of the responsive manufacturer information showed that vehicles presenting an unexpected reduction in steering ability due to a welding tool misalignment were correctly addressed via recall 18V-675. General complaints concerning the weld appearance were not associated with a realized risk to motor vehicle safety. ODI identified a limited number of reports involving weld separation on vehicles that were out of scope of recall 18V-675. FCA identified various causes of weld quality issues in early production (build dates prior to March 2018) including improper welding techniques on galvanized frames and component part variation leading to off-seam welds. These issues were addressed in production for subject vehicles built after July 2018 and preceded a drop in weld failure reports. ODI reviewed manufacturer and agency reports of weld failures out of scope of recall 18V-675 and did not find any that resulted in a loss of vehicle control. There are no known crashes, injuries, or fatalities as a result of weld failures on vehicles not included in recall 18V-675. Due to the steering related consequence associated with Recall 18V-675, ODI opted to include a request for information regarding various steering issues experienced by vehicles included in this investigation. ODI reviewed manufacturer as well as agency data and determined these various steering issues were not related to any weld defect. Since the opening of this investigation, FCA has addressed the following steering concerns; a. Steering looseness due to material choice in the steering box internal components. FCA released an updated part with an internal component material less sensitive to temperature variances (TSB 08-003-21 REV. A).NHTSA will take further investigative action if justified. b. Steering wobble or shimmy due to a manufacturing and design deficiency in the steering damper. FCA released a part via Customer Satisfaction Notification (CSN) V41 in June 2019 which implemented supplier quality control improvements and design changes due to the presence of air in the base valve which degraded damping performance. NHTSA will take further investigative action if justified. c. Steering stiction, or loss of power steering, due to an underpowered steering pump calibration that occurred at highway speeds during cold weather. In December 2021, FCA released CSN Y95 which corrected this issue via software update. Due to the decreased number of consumer complaints, the service campaign appears to have addressed the issue related to an underpowered steering pump. NHTSA will take further investigative action if justified. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
A Preliminary Evaluation is the first formal stage: NHTSA has decided the complaints and other information it screened are worth a closer look, and asks the manufacturer for its own data on the condition. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one closed without a recall. That means NHTSA found no defect trend it chose to act on at the time, or the manufacturer addressed the condition another way (a service campaign or a bulletin, which have their own pages). A closed file can be reopened if new reports arrive.
Model years it names
Source: as NHTSA filed themA vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs PE19012 a recall?
No. A preliminary evaluation is NHTSA asking questions, not a recall. A safety recall carries an NHTSA campaign number and a duty to repair for free; this one closed without one. Whether one particular vehicle has an open recall is a VIN question at nhtsa.gov/recalls.
Is PE19012 still open?
No. It closed on Oct 29, 2023 without a recall.
Which vehicles does PE19012 cover?
NHTSA opened it on 2 model years: 2019 Jeep Wrangler, 2018 Jeep Wrangler. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.