P0777
4 owner reports and 0 manufacturer filings across 3 model years from Honda, Jeep.
Where P0777 shows up
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports | Parts |
|---|---|---|---|---|
| 2016 Jeep Patriot | Power Train | — | 2 | |
| 2019 Honda Pilot | Power Train | — | 1 | |
| 2016 Honda Pilot | Engine | — | 1 |
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.
What it gets filed under
What owners said
Source: NHTSA complaint databaseOwners’ own words, one per nameplate, scrubbed of anything identifying. These are unverified reports filed with NHTSA — they are what was said, not a finding that it was true.
Codes: P0777 - pressure control solenoid b - stuck on, P0741 - torque converter clutch solenoid - stuck off, P0730 incorrect great ratio
A code names the test that failed. Not the part.
No manufacturer filing in NHTSA’s file names P0777. Owners’ reports are the record so far — and the model years they came from are above.
What P0777 means
Source: SAE J2012 / OBD-IIP0777 sits in the generic range of the OBD-II standard, so it means the same thing on every vehicle sold in the United States — but WhichTrim does not carry a definition for it and will not invent one. What is on this page is the record: who named it and on what.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about P0777
Source: NHTSA files and the OBD-II standardCan I keep driving with P0777 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.