P011A on Mazda vehicles

A model year is listed because the code is named in its own record — a bulletin filed against it, or an owner’s complaint about it — not because every one of these vehicles sets it. Counts are documents in NHTSA’s files, not failure rates.

Owners’ own words, scrubbed of anything identifying. Unverified reports filed with NHTSA — what was said, not a finding that it was true.

Bulletins and campaigns Mazda filed with NHTSA whose summary names P011A. Quote the document number at the service desk — it is a diagnosis the maker has already written down.

• SA218 Service bulletin
  2016-03-01 · Engine And Engine Cooling — Engine
• IF YOU ENCOUNTER A 2013-2016 CX-5 WITH DTC P011A WITH OVERHEATING AND/OR NO HEAT FROM THE HEATER, COMPARE THE HEATER PERFORMANCE TO ANOTHER CX-5. IF ANOTHER CX-5 IS NOT AVAILABLE, CHECK THE HEATER CORE FLOW AND IF RESTRICTED, DRAIN/REPLACE COOLANT AND REPLACE THE HEATER CORE. NOTE: IF THE CODE IS SET BY ITSELF, WITHOUT OVERHEATING AND/OR NO HEAT FROM THE HEATER, FOLLOW THE WORKSHOP MANUAL ON MS3 O
• SA218 Service bulletin
  2016-03-01 · Engine
• IF YOU ENCOUNTER A 2013-2016 CX-5 WITH DTC P011A WITH OVERHEATING AND/OR NO HEAT FROM THE HEATER, COMPARE THE HEATER PERFORMANCE TO ANOTHER CX-5. IF ANOTHER CX-5 IS NOT AVAILABLE, CHECK THE HEATER CORE FLOW AND IF RESTRICTED, DRAIN/REPLACE COOLANT AND REPLACE THE HEATER CORE. NOTE: IF THE CODE IS SET BY ITSELF, WITHOUT OVERHEATING AND/OR NO HEAT FROM THE HEATER, FOLLOW THE WORKSHOP MANUAL ON MS3 O
• 01-015-15-3064 Service bulletin
  2015-07-21 · Equipment — Other — Owners/Service/Other Manual
• SOME VEHICLES USING AN AUXILIARY HEATER (BLOCK HEATER) MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0116:00 OR P011A WHEN STARTING IN COLD WEATHER BELOW 32 °F (0 °C). • P0116:00: ECT SENSOR NO.1 CIRCUIT RANGE/PERFORMANCE PROBLEM • P011A:00: ECT SENSOR NO.1/NO.2 PERFORMANCE PROBLEM. THIS IS CAUSED BY ERROR DETECTION LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BE
• 07-007-17-3384 Service bulletin
  2017-09-08 · Equipment — Appliance — Air Conditioner
• Some customers may complain about poor heater performance even after the engine reaches normal operating temperature. This may be caused by a clogged heater unit. For Mazda6 and CX-5, the check engine light may illuminate with the DTC P011A:00 stored at the same time. P011A:00 ECT sensor No.1/No.2 performance problem. NOTE: Refer to TSB 01-015/15 if the customer is using a block heater at temperat
• 07-007-19-3638 Service bulletin
  2019-11-04 · Engine
• Some customers may complain about poor heater performance even after the engine reaches normal operating temperature. This may be caused by a plugged heater core. For 2014-2016 Mazda6 and 2013-2016 (US spec) / 2017 (Mexico spec) CX-5, the CHECK ENGINE light may turn on with DTC P011A:00 (ECT sensor No.1/No.2 performance problem) stored at the same time. NOTE: Refer to TSB 01-015/15 if the customer
• 01-015-15-3064A Service bulletin
  2015-09-16 · Equipment — Other — Owners/Service/Other Manual
• SOME VEHICLES USING AN AUXILIARY HEATER (BLOCK HEATER) MAY EXPERIENCE THE CHECK ENGINE LIGHT ON WITH DTC P0116:00 OR P011A WHEN STARTING IN COLD WEATHER BELOW 32 °F (0 °C). • P0116:00: ECT SENSOR NO.1 CIRCUIT RANGE/PERFORMANCE PROBLEM • P011A:00: ECT SENSOR NO.1/NO.2 PERFORMANCE PROBLEM THIS IS CAUSED BY ERROR DETECTION LOGIC OF THE PCM. TO CORRECT THE PROBLEM, THE CONTROL LOGIC OF THE PCM HAS BEE

A stored code names the test that failed, never the part that caused it. The record above is what Mazda and its owners have filed about it; the code’s page across every make has the whole file.