⌘K
Federal filingsHome›Recalls› 24V304000
NHTSA campaign 24V304000 · manufacturer recall PMA37

2024 Nissan Sentra: power train recall

An unexpected loss of drive power can increase the risk of a crash.

high 9,645 vehicles affected 90% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Nissan North America, Inc. (Nissan) is recalling certain 2024 Sentra vehicles. The front left-side driveshaft may not be fully seated in the continuously variable transmission (CVT) assembly, or may have a loose or missing retaining clip, which can cause a transmission fluid leak and loss of drive power. Risk An unexpected loss of drive power can increase the risk of a crash. Fix Dealers will inspect the front left driveshaft, and if necessary, replace the driveshaft and CVT assembly, free of charge. Owner notification letters were mailed June 26, 2024. Owners may contact Nissan customer service at 1-800-867-7669. Nissan's number for this recall is PMA37.

Reported to NHTSA Apr 29, 2024 by Nissan North America, Inc, owners notified Jun 26, 2024.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

An improperly seated or unretained driveshaft can cause transmission fluid loss and sudden loss of drive power in traffic, creating a crash risk without rising to the level of an uncontrolled vehicle or fire/explosion event.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Not stated in the dealer documents
Remedy Instructions filed: the dealer bulletin exists

Parts named

Part numberDescriptionQty
31020-X260AAUTOMATIC TRANSAXLE1
39101-6LY0ASHAFT ASSY – FRONT DRIVE, LH1
31084-M750ASEAL – O-RING1
21626-32U00WASHER – SEAL1
20692-1HA0AGASKET – EXHAUST1
20691-30P0AGASKET – EXHAUST1
14035-5TA0BGASKET – INTAKE MANIFOLD1
16175-JA00AGASKET – INTAKE ADAPTER1
92471-N823ASEAL – O-RING1
92472-N823ASEAL – O-RING1
16439-7S01ECLAMP2
21639-7990ACLAMP2
38225-ET01CCIRCLIP – SIDE GEAR2
40262-4GA0DNUT – LOCK, FRONT WHEEL BEARING2
01223-A01112
54588-JA0602

Special tools

  • are available from Tech Mate online www.techmatetools.com, or by phone: 1-833-397-3493
  • When ordering, keep in mind that the tool part number prefix has changed from “J” to “NI” For example, J-52982 is now NI
  • Required Special Tool - Lock Nut Chisel [Cape Chisel (NI-5298
  • 2)]  Each dealer has been previously sh ipped one Cape Chisel (J-52982)
  • Figure 6 7. Remove the Front LH Drive Shaft and discard it  Refer to the ESM: TRANSMISSION & DRIVELINE > FRONT AXLE > R
  • 6/13 NTB24-024D

Torque

  • o Tighten the torque converter nuts to 51.0 N•m (5.2 kg-m, 38 ft-lb)

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign PMA37). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 24V304000
Model yearClassSafety SignalRecalls on file
2024 Nissan SentraMidsize SedanB3

Those are the model years inside WhichTrim's range, 2016 onward. The campaign may cover others outside it, and the only thing that settles whether one specific vehicle is included is its VIN.

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 90%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 24V304000 · the manufacturer calls it PMA37

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is PMA37 the same recall as 24V304000?

Yes. PMA37 is the number Nissan North America, Inc uses for this campaign in its own paperwork and in the letter it sends owners. 24V304000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.