⌘K
HomeRecalls 24V158000
NHTSA campaign 24V158000 · manufacturer recall Ford 24V-102

2024 Entegra and Jayco: power train recall

Wheel lock-up or driveshaft separation can result in a loss of drive power. A disconnected driveshaft can also result in a roll away when the vehicle is in park without the parking brake applied. Any of these scenarios can increase the ri

high 82 vehicles affected

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Jayco, Inc. (Jayco) is recalling certain 2024 Jayco Granite Ridge, Solstice, Entegra Coach Condor, Expanse, and Expanse LI motorhomes. An inadequate amount of rear axle lubricant may cause rear axle tail bearing damage and seizure, which can result in wheel lock-up or driveshaft separation. Risk Wheel lock-up or driveshaft separation can result in a loss of drive power. A disconnected driveshaft can also result in a roll away when the vehicle is in park without the parking brake applied. Any of these scenarios can increase the risk of a crash. Fix Dealers will inspect the rear axle and replace the axle bearings or axle assembly as necessary, free of charge. Owner notification letters were mailed April 1, 2024. Owners may contact Jayco customer service at 1-800-283-8267. Jayco's number for this recall is Ford 24V-102.

Reported to NHTSA Feb 28, 2024 by Jayco, Inc, owners notified Apr 1, 2024.

Which vehicles are covered

Source: NHTSA campaign 24V158000
Model yearOn WhichTrim
2024 Entegra Condor
2024 Entegra Expanse
2024 Entegra Expanse LI
2024 Jayco Granite Ridge
2024 Jayco Solstice

None of the vehicles this campaign names has a page on WhichTrim: the catalogue covers the cars, trucks and SUVs the EPA certifies from 2016 on, and these vehicles fall outside it — older model years, or motorhomes, trailers, buses, motorcycles and chassis cabs the EPA does not rate. The campaign record above is complete as filed, and whether one specific vehicle is included is settled by its VIN. Other campaigns on vehicles without a page here →

The federal paperwork

Source: nhtsa.gov

Filed documents

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. NHTSA checks a VIN against the manufacturer's own list and tells you whether the repair is still outstanding on that vehicle.

NHTSA VIN recall lookup →

Campaign 24V158000 · the manufacturer calls it Ford 24V-102

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

Common questions

Source: NHTSA, 49 CFR Part 573

Is Ford 24V-102 the same recall as 24V158000?

Yes. Ford 24V-102 is the number Jayco, Inc uses for this campaign in its own paperwork and in the letter it sends owners. 24V158000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.