⌘K
Federal filingsHome›Recalls› 20V397000
NHTSA campaign 20V397000 · manufacturer recall 51G6

2016–2018 Audi A8 and 1 other Audi model: structure recall

If the seal contacts hot engine components, there could be an increased risk of a fire.

high 12,964 vehicles affected 89% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Volkswagen Group of America, Inc. (Volkswagen) is recalling certain 2013-2018 Audi S8 and A8 vehicles. The seal around the engine compartment may come loose and contact hot engine components. Risk If the seal contacts hot engine components, there could be an increased risk of a fire. Fix Audi will notify owners, and dealers will install a retaining plate to prevent the engine compartment seal from loosening. The recall began September 4, 2020. Owners may contact Audi customer service at 1-800-253-2834. Volkswagen's number for this recall is 51G6.

Reported to NHTSA Jul 7, 2020 by Volkswagen Group of America, Inc, owners notified Sep 4, 2020.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

The seal may come loose and contact hot engine components with a risk of fire, but the filing is hedged ('may come loose', 'could be an increased risk') and no stop-drive order was issued, placing this below the critical threshold.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Yes: the bulletin says the vehicle may not be sold or delivered until repaired
Remedy Instructions filed: the dealer bulletin exists

Parts named

Part numberDescriptionQty
4H0-807-153Lock Plate UOL

Torque

  • • Install new nuts <2> and torque to 8 Nm

The advisory, as filed: “New Vehicles in Dealer Inventory: It is a violation of federal law for a dealer to deliver a new motor vehicle or any new or used item of motor vehicle equipment (including a tire) covered by this notification under a sale or lease until the defect or noncompliance is remedied.”

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign 51G6). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 20V397000
Model yearClassSafety SignalRecalls on file
2016 Audi A8Large SedanC4
2017 Audi A8Large SedanC3
2018 Audi A8Large SedanB2
2016 Audi S8Large SedanC3
2017 Audi S8Large SedanB2
2018 Audi S8Large SedanA1

Those are the model years inside WhichTrim's range, 2016 onward. The campaign may cover others outside it, and the only thing that settles whether one specific vehicle is included is its VIN.

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 89%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 20V397000 · the manufacturer calls it 51G6

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is 51G6 the same recall as 20V397000?

Yes. 51G6 is the number Volkswagen Group of America, Inc uses for this campaign in its own paperwork and in the letter it sends owners. 20V397000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.