⌘K
HomeRecalls 18V913000
NHTSA campaign 18V913000 · manufacturer recall FL-802

2017–2019 Fccc, Freightliner and Western Star: steering recall

Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash.

high 501 vehicles affected 63% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Freightliner 114SD, 122SD, 108SD, Cascadia and Business class M2 trucks, Freightliner Custom Chassis XBS, XCL, XCM, MT45, MT55, S2G, S2RV, XCR and XCS custom chassis and Western Star 4700, 4900 and 5700 trucks equipped with Detroit Axle axles. The affected vehicles may have loose steering and tie rod arm bolts. Risk Loose tie rod arm bolts may lead to separation of the tie rod arm, resulting in a loss of vehicle control, increasing the risk of a crash. Fix DTNA has notified owners, and dealers will inspect the steering arm and tie rod arm bolts for to make sure that they are properly tightened, installing new fasteners as necessary, free of charge. The recall began February 9, 2019. Owners may contact Daimler Trucks at 1-800-547-0712. DTNA's number for this recall is FL-802.

Reported to NHTSA Dec 19, 2018 by Daimler Trucks North America LLC, owners notified Feb 9, 2019.

Which vehicles are covered

Source: NHTSA campaign 18V913000

Vehicles built Feb 10, 2017 to Jul 21, 2019 — a VIN outside that window is not part of this campaign even if the year, make and model match.

Model yearOn WhichTrim
2017 Fccc MT45
2018 Fccc MT45
2019 Fccc MT45
2017 Fccc MT55G
2018 Fccc MT55G
2019 Fccc MT55G
2018 Fccc Redundant S2G
2017 Fccc S2G
2019 Fccc S2G
2017 Fccc S2RV
2018 Fccc S2RV
2019 Fccc S2RV
2017 Fccc XBS
2018 Fccc XBS
2019 Fccc XBS
2017 Fccc XCL
2018 Fccc XCL
2019 Fccc XCL
2017 Fccc XCM
2018 Fccc XCM
2019 Fccc XCM
2017 Fccc XCR
2018 Fccc XCR
2019 Fccc XCR
2017 Fccc XCS
2018 Fccc XCS
2019 Fccc XCS
2017 Freightliner 108SD
2018 Freightliner 108SD
2019 Freightliner 108SD
2017 Freightliner 114SD
2018 Freightliner 114SD
2019 Freightliner 114SD
2017 Freightliner 122SD
2018 Freightliner 122SD
2019 Freightliner 122SD
2017 Freightliner Business Class M2
2018 Freightliner Business Class M2
2019 Freightliner Business Class M2
2017 Freightliner Cascadia
2018 Freightliner Cascadia
2019 Freightliner Cascadia
2017 Western Star 4700
2018 Western Star 4700
2019 Western Star 4700
2017 Western Star 4900
2018 Western Star 4900
2019 Western Star 4900
2017 Western Star 5700
2018 Western Star 5700
2019 Western Star 5700

None of the vehicles this campaign names has a page on WhichTrim: the catalogue covers the cars, trucks and SUVs the EPA certifies from 2016 on, and these vehicles fall outside it — older model years, or motorhomes, trailers, buses, motorcycles and chassis cabs the EPA does not rate. The campaign record above is complete as filed, and whether one specific vehicle is included is settled by its VIN. Other campaigns on vehicles without a page here →

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 63%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Filed documents

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. NHTSA checks a VIN against the manufacturer's own list and tells you whether the repair is still outstanding on that vehicle.

NHTSA VIN recall lookup →

Campaign 18V913000 · the manufacturer calls it FL-802

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

Common questions

Source: NHTSA, 49 CFR Part 573

Is FL-802 the same recall as 18V913000?

Yes. FL-802 is the number Daimler Trucks North America LLC uses for this campaign in its own paperwork and in the letter it sends owners. 18V913000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. This campaign covers vehicles built Feb 10, 2017 to Jul 21, 2019. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.