⌘K
Federal filingsHome›Recalls› 16V949000
NHTSA campaign 16V949000 · manufacturer recall 99.02.08

2016–2017 DRV Elite Suites ALL and 1 other DRV model: service brakes, hydraulic recall

A loss of braking capability can increase the risk of a crash.

high 110 vehicles affected 57% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem DRV Suites (DRV) is recalling certain model year 2016-2017 Elite Suites and Mobile Suites fifth wheel recreational trailers manufactured January 29, 2016, to November 14, 2016. The brake caliper bolts may loosen, causing a loss of braking capability. Risk A loss of braking capability can increase the risk of a crash. Fix DRV has notified owners, and dealers will replace the caliper bolts and sleeves using a thread adhesive, free of charge. The recall began on January 11, 2017. Owners may contact DRV customer service at 1-260-562-3500. DRV's number for this recall is 99.02.08.

Reported to NHTSA Dec 23, 2016 by DRV Suites, owners notified Jan 11, 2017.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

Loosening brake caliper bolts on a trailer can cause loss of braking capability, directly enabling a crash, which is a high-severity brake failure even though it is on a towed trailer rather than the towing vehicle.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Not stated in the dealer documents
Remedy Instructions filed: the dealer bulletin exists

Labour, as the warranty table lists it

  • 1 h

The operation code and time the manufacturer pays the dealer; a customer-pay estimate elsewhere is a different number.

Special tools

  • 1. ½” ratchet wrench; 2. short ½” socket, 3/8” drive; 3. 3/8” drive torque wrench; 4. short straight blade screwdriver P
  • 99-02-08 RECALL SERVICE BULLETIN Caliper View: Below is a view of the Caliper with the Guide Bolts and Guide Sleeves rem
  • 99-02-08 RECALL SERVICE BULLETIN Step 2: With the IS system unloaded, using the ½” ratchet wrench, remove the 1st Calipe
  • 99-02-08 RECALL SERVICE BULLETIN Step 5: Apply Red Loctite to the new Caliper Guide Bolt Step 6: Using ratchet wrench, r

Torque

  • Caliper Guide Bolts should be torqued to 45 ft-lbs

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign 99.02.08). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 16V949000

Vehicles built Jan 29, 2016 to Nov 14, 2016 — a VIN outside that window is not part of this campaign even if the year, make and model match.

Model yearOn WhichTrim
2016 DRV Elite Suites ALL—
2017 DRV Elite Suites ALL—
2016 DRV Mobile Suite—
2017 DRV Mobile Suite—

None of the vehicles this campaign names has a page on WhichTrim: the catalogue covers the cars, trucks and SUVs the EPA certifies from 2016 on, and these vehicles fall outside it — older model years, or motorhomes, trailers, buses, motorcycles and chassis cabs the EPA does not rate. The campaign record above is complete as filed, and whether one specific vehicle is included is settled by its VIN. Other campaigns on vehicles without a page here →

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 57%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 16V949000 · the manufacturer calls it 99.02.08

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is 99.02.08 the same recall as 16V949000?

Yes. 99.02.08 is the number DRV Suites uses for this campaign in its own paperwork and in the letter it sends owners. 16V949000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. This campaign covers vehicles built Jan 29, 2016 to Nov 14, 2016. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.