⌘K
Federal filingsHome›Recalls› 16V142000
NHTSA campaign 16V142000 · manufacturer recall 33.10U10124B

2005–2009 Setra S417: suspension recall

Should the tube crack and separate from the shaft of the vehicle, loss of vehicle control is possible, increasing the risk of a crash.

critical 7 vehicles affected 100% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Setra of North America (Setra) is recalling certain model year 2005-2009 S417 coaches manufactured March 1, 2005, to February 28, 2009, that had service part lower control arm(s) installed. The hot crimping that connects the tube ends to the control arm joint housing shafts may crack, causing the tube to separate from the shaft. Risk Should the tube crack and separate from the shaft of the vehicle, loss of vehicle control is possible, increasing the risk of a crash. Fix MCI, the sales agent for these vehicles, notified owners verbally, and dealers will replace the lower control arms, free of charge. The recall began on March 28, 2016. Owners may contact Setra customer service at 1-800-241-2947. Setra's number for this recall is 33.10U10124B.

Reported to NHTSA Mar 8, 2016 by Setra of North America, owners notified Mar 28, 2016.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

A front lower control arm separating from the shaft removes steering/suspension control from the driver without warning at speed, which is a direct loss-of-control failure of this vehicle.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

The fix, from the dealer bulletin

Source: NHTSA remedy instructions and dealer notice
Stop-sale Not stated in the dealer documents
Remedy Instructions filed: the dealer bulletin exists

Read from NHTSA’s copy of the manufacturer’s dealer documents (manufacturer campaign 33.10U10124B). The procedure itself is in the bulletin; a franchised dealer has the current copy on the manufacturer’s portal, and that copy governs. Working a lot or a fleet? Recall Watch carries this line on every VIN it checks: remedy status, hours, stop-sale.

Which vehicles are covered

Source: NHTSA campaign 16V142000

Vehicles built Mar 1, 2005 to Feb 28, 2009 — a VIN outside that window is not part of this campaign even if the year, make and model match.

Model yearOn WhichTrim
2005 Setra S417—
2006 Setra S417—
2007 Setra S417—
2008 Setra S417—
2009 Setra S417—

None of the vehicles this campaign names has a page on WhichTrim: every model year it names is older than the catalogue, which begins at 2016. The campaign record above is complete as filed, and whether one specific vehicle is included is settled by its VIN. Other campaigns on vehicles without a page here →

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 100%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 16V142000 · the manufacturer calls it 33.10U10124B

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Is 33.10U10124B the same recall as 16V142000?

Yes. 33.10U10124B is the number Setra of North America uses for this campaign in its own paperwork and in the letter it sends owners. 16V142000 is the number NHTSA files it under. One recall, two references — dealers and service departments generally quote the manufacturer's.

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. This campaign covers vehicles built Mar 1, 2005 to Feb 28, 2009. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.