⌘K
Federal filingsHome›Recalls› 16V023000
NHTSA campaign 16V023000

2010–2015 Altec AH100 and 2 other Altec models: electrical system recall

An aerial device that moves unexpectedly increases the risk of injury to the operator.

high 195 vehicles affected 99% reported repaired

What was reported

Source: manufacturer filing, 49 CFR Part 573
Problem Altec Industries (Altec) is recalling certain model year 2010-2015 AH75, AH85, and AH100 Aerial Devices manufactured January 10, 2008, to December 31, 2015. The affected units have a hydraulic pressure control valve that may allow the aerial device to move even when not told to do so. Risk An aerial device that moves unexpectedly increases the risk of injury to the operator. Fix Altec will notify owners, and dealers will replace the hydraulic pressure control valves, free of charge. The recall began on March 15, 2016. Owners may contact Altec customer service at 1-205-991-7733.

Reported to NHTSA Jan 20, 2016 by Altec Industries Inc, owners notified Mar 15, 2016.

What that means, in plain English

Source: WhichTrim's reading of the filing above — not NHTSA's wording

A hydraulic valve that allows unexpected aerial device movement can cause serious injury to the operator, representing a loss of control of vehicle-mounted equipment, but this is a work-platform/aerial device rather than a direct loss of driving control of the vehicle itself.

Written for us by a language model from the manufacturer's filed text, which is quoted in full above. Where the two differ, the filing is the record and this is only our summary of it.

Which vehicles are covered

Source: NHTSA campaign 16V023000

Vehicles built Jan 10, 2008 to Jan 31, 2015 — a VIN outside that window is not part of this campaign even if the year, make and model match.

Model yearOn WhichTrim
2010 Altec AH100—
2011 Altec AH100—
2012 Altec AH100—
2013 Altec AH100—
2014 Altec AH100—
2015 Altec AH100—
2010 Altec AH75—
2011 Altec AH75—
2012 Altec AH75—
2013 Altec AH75—
2014 Altec AH75—
2015 Altec AH75—
2010 Altec AH85—
2011 Altec AH85—
2012 Altec AH85—
2013 Altec AH85—
2014 Altec AH85—
2015 Altec AH85—

None of the vehicles this campaign names has a page on WhichTrim: every model year it names is older than the catalogue, which begins at 2016. The campaign record above is complete as filed, and whether one specific vehicle is included is settled by its VIN. Other campaigns on vehicles without a page here →

How much of it has been fixed

Source: manufacturer quarterly report, 49 CFR 573.7
Reported repaired 99%

of the campaign

The final figure: the six quarters of reporting that 49 cfr 573.7 requires have closed.

This is the manufacturer's own cumulative count of vehicles it has inspected and repaired, divided by the vehicles the campaign covers. It files that count with NHTSA every quarter for six consecutive quarters, starting from the quarter in which owners were told a remedy was ready, and then the obligation ends — so a figure on an older campaign is where the count stopped, not where it stands today.

It rarely reaches 100%, and not because the work was not done. The same report asks manufacturers to count vehicles they could not reach at all — exported, stolen, scrapped, or simply never located — and those stay in the denominator. A low number means a lot of these vehicles are still out there unrepaired; it does not tell you which ones.

The federal paperwork

Source: nhtsa.gov

Check one specific vehicle

A recall applies to a build range, so year, make and model cannot settle it. Type the VIN and the WhichTrim recall report checks this campaign’s build window and engine against it.

Campaign 16V023000

Own one, or run a fleet? Recall Watch checks each VIN against every new NHTSA campaign and emails you when one lands, this one's expansions included. Or take a free one-line alert by model year.

Advertisement

A recall covers a build range. Only your VIN settles it.

Check it with the WhichTrim recall report now, or have us check it every night and email you when something new is filed.

Photo: Taiga Miyamoto / Unsplash

Common questions

Source: NHTSA, 49 CFR Part 573

Does this recall repair cost anything?

No. Federal law requires the manufacturer to remedy a safety defect or a compliance failure at no charge, for vehicles up to 15 years old measured from the date of first sale. A dealer that asks you to pay for a recall repair is in the wrong.

How do I know whether my vehicle is included?

By VIN, not by model year. This campaign covers vehicles built Jan 10, 2008 to Jan 31, 2015. The manufacturer files a build range with NHTSA and only vehicles inside it are covered, so two identical-looking cars from the same year can differ. NHTSA's own lookup checks a VIN against the manufacturer's list.

What if the repair is not available yet?

It happens, and often. Manufacturers must notify owners when a defect is found even if the parts or the software are not ready, then notify them a second time once the remedy exists. The remedy filed for this campaign is described above.

What did the manufacturer say was wrong?

The problem, risk and fix quoted on this page are the manufacturer's own words as filed with NHTSA under 49 CFR Part 573. WhichTrim does not paraphrase them.

Who started this recall?

NHTSA's record credits the manufacturer. A recall can begin with the manufacturer's own testing, with a defect investigation, or with a compliance test against a Federal Motor Vehicle Safety Standard.