Your vehicleHome›Porsche›911›2020› 911 Carrera 4S

2020 Porsche 911

911 Carrera 4S AWD

Gas AWD MSRP —Compare this trim against anything →

What the 911 Carrera 4S adds over the 911 Carrera S

Spec	911 Carrera S	911 Carrera 4S
Curb weight (maximum)	3382 lbs	3487 lbs
Curb weight (minimum)	3382 lbs	3487 lbs
Fuel tank capacity	16.9 gal	17.6 gal
Gross vehicle weight rating	4376 lbs	4431 lbs
Payload capacity	994 lbs	945 lbs

Standard here, not on the base trim: Acceleration 0-60 PDK (sec): 3.4 sec., Acceleration 0-60 PDK with Launch Control (sec): 3.2 sec., Curb weight (lbs): 3487 lbs., Final drive ratio front axle: 3.33, Fuel tank capacity - refill volume (gal): 17.6 gal., Gross Vehicle Weight (lbs): 4431 lbs., Payload range (lbs): 945 lbs., Quarter mile time PDK (sec): 11.8 sec., Quarter mile time PDK with Launch Control (sec): 11.6 sec., Top track speed PDK (mph): 190 mph

Specifications

Source: manufacturer press kit

Brakes

Front brake diameter	350 mm
Front brake type	Aluminum monobloc fixed-caliper brake, Steel rotor
Rear brake diameter	350 mm
Rear brake type	Aluminum monobloc fixed-caliper brake, Steel rotor

Cargo

Cargo volume behind 1st row	9.3 cu-ft
Cargo volume behind 2nd row	4.7 cu-ft

Dimensions Exterior

Overall height	51.2 in
Overall length	177.9 in
Overall width	72.9 in
Wheelbase	96.5 in

Engine Basics

Aspiration	twin turbo
Cylinder count	6
Engine displacement	3000 cc
Fuel injection system	gdi mpi
Engine type (full description)	3.0L Boxer twin-turbo
Valve configuration	4 valves per cylinder

Engine Output

Horsepower	443 hp
Torque	390 lb-ft

Fuel System

Minimum recommended octane	91
Fuel tank capacity	17.6 gal

Steering

Steering type	Variable ratio electromechanical power steering
Turning radius (curb-to-curb)	36.8 ft

Suspension

Front suspension type	MacPherson strut with anti-roll bar
Rear suspension type	Aluminum multi-link with anti-roll bar

Tires

Tire size

245/35 ZR 20 / 305/30 ZR 21

Transmission

Final drive ratio	3.39 / 0.92
Transmission speeds	8
Transmission type	8-speed dual-clutch PDK

Weights

Curb weight (maximum)	3487 lbs
Curb weight (minimum)	3487 lbs
Gross vehicle weight rating	4431 lbs
Payload capacity	945 lbs

Wheels

Wheel diameter	20 in
Wheel width	8.5 in

Standard & optional equipment

Source: manufacturer press kit

Exterior14 std · 1 opt

Curb weight (lbs): 3487 lbs.
Drag coefficient (Cd): 0.31
Gross Vehicle Weight (lbs): 4431 lbs.
Height with optional PASM Sport Suspension (inches/mm): 50.8 in. / 1291 mm
Height with standard PASM suspension (inches/mm): 51.2 in. / 1300 mm
Length with standard PASM Sport Suspension (inches/mm): 177.9 in. / 4519 mm
Standard wheels: 20" / 21" Carrera S
Tires (front/rear): 245/35 ZR 20 / 305/30 ZR 21
Track width front (inches/mm): 62.5 in. / 1589 mm
Track width rear (inches/mm): 61.2 in. / 1557 mm
Wheelbase (inches/mm): 96.5 in. / 2450 mm
Wheels (front/rear): 8.5J x 20" / 11.5J x 21"
Width w/ mirrors (inches/mm): 79.7 in. / 2024 mm
Width w/o mirrors (inches/mm): 72.9 in. / 1852 mm
Length with optional PASM Sport Suspension (inches/mm): 178.4 in. / 4530 mm optional

Powertrain28 std · 0 opt

Acceleration 0-60 PDK (sec): 3.4 sec.
Acceleration 0-60 PDK with Launch Control (sec): 3.2 sec.
Bore/Stroke (mm/mm): 91.0 mm / 76.4 mm
Clutch 1/Clutch 2 diameter (inches): 8.7 / 6.6 inches (PDK)
Compression ratio (tolerance +/- 0.3): 10.2 : 1
Construction: Aluminum crankcase and heads
Cylinders: 6
Displacement (Liters): 3.0 l
Drivetrain: Rear-wheel drive
Engine layout: Rear Engine
Engine type: Boxer, twin-turbo
Final drive ratio front axle: 3.33
Fuel injection: Direct Fuel Injection (DFI)
Fuel tank capacity - refill volume (gal): 17.6 gal.
Fuel: Premium
Lubrication: Integrated dry-sump
Maximum engine speed: 7500
Maximum power output @ engine speed: 443 hp @ 6500
Maximum torque @ engine speed: 390 lb.-ft. @ 2300-5000
Number of gears: 8
Output per liter: 148 hp
Power to weight ratio (lb/hp): 7.7 / 7.9 / 8.0 / 8.2
Quarter mile time PDK (sec): 11.8 sec.
Quarter mile time PDK with Launch Control (sec): 11.6 sec.
Rear Axle Ratio / rear constant transaxle ratio: 3.39 / 0.92
Top track speed PDK (mph): 190 mph
Transmission type: 8-speed dual-clutch PDK
Valves per cylinder: 4

Chassis13 std · 5 opt

Body: Monocoque lightweight body in a combination of steel, aluminum, and magnesium
Caliper color: Red
Caliper type: Aluminum monobloc fixed-caliper brake
Front Axle: MacPherson strut with anti-roll bar
Number of pistons (front/rear): 6 / 4
Rear Axle: Aluminum multi-link with anti-roll bar
Rotor diameter (front/rear) mm: 350 mm / 350 mm
Rotor material: Steel
Rotor thickness (front/rear) mm: 34 mm / 28 mm
Steering Ratio with rear-axle steering: 14.1 : 1 (on-center) to TBD
Steering Ratio: 15.0 : 1 (on-center) to TBD
Steering System: Variable ratio electromec. power steering
Turning Circle: 36.8 ft / 35.8 ft. (with rear axle steering)
Caliper color (optional PCCB system): Yellow optional
Caliper type (optional PCCB system): Aluminum monobloc fixed-caliper brake optional
Rotor diameter (front/rear - optional PCCB system) mm: 410 mm / 390 mm optional
Rotor material (optional PCCB system): Carbon-ceramic composite optional
Rotor thickness (front/rear - optional PCCB system) mm: 36 mm / 32 mm optional

Cargo3 std · 0 opt

Cargo area volume (cu.-ft.) front trunk: 132 l / 4.66 cu.-ft.
Cargo area volume (cu.-ft.) rear seats: 264 l / 9.32 cu.-ft.
Payload range (lbs): 945 lbs.

Ranked by what shoppers ask about first; standard equipment before options.

Transcribed from the manufacturer's official press kit for the 2020 911. Confirm with the window sticker for a specific unit.

Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.

Common questions about the 911 Carrera 4S

Source: EPA, NHTSA and manufacturer press kits

What does the 2020 Porsche 911 911 Carrera 4S add over the 911 Carrera S?

Against the 911 Carrera S, 10 features become standard that the 911 Carrera S does not and 5 published specifications differ. Both lists are on this page, taken from the manufacturer's own press material.