Ford recall query RQ23006
Loss of Motive Power. NHTSA’s Office of Defects Investigation opened this recall query about the canister on 7 model years (2012–2018). Opened Sep 15, 2023, closed Dec 20, 2024 after 15 months without a recall. closed
What NHTSA says
Source: Office of Defects Investigation, as filedOn September 15, 2023, the Office of Defect Investigation (ODI) opened this Recall Query (RQ) after receiving 98 consumer complaints alleging loss of motive power in model year (MY) 2012-2018 Ford Focus vehicles. The RQ focused on the effectiveness of the remedies of Recall 18V-735 and 19V-515. In October 2018, Ford issued Recall 18V-735, which updated Powertrain Control Module (PCM) software in MY 2012-2018 Ford Focus vehicles equipped with 2.0L GDI engines built prior to April 13, 2017, and those with 2.0L GTDI engines built prior to February 2, 2018. The recall addressed vehicles experiencing a malfunctioning Canister Purge Valve (CPV) that can stick open and PCM software that does not adequately detect a stuck-open CPV condition. A CPV that is stuck open can cause excessive vacuum in the fuel vapor management system, potentially deforming the fuel tank, collapsing on itself. This deformation of the fuel tank can cause a Malfunction Indicator Light (MIL) to illuminate, an inaccurate or erratic fuel gauge indication, drivability issues, and/or loss of motive power. In July 2019, Ford issued Recall 19V-515, which addressed certain MY 2012 and MY 2017 Ford Focus vehicles equipped with 2.0L GDI and MY 2013-2014 Ford Focus vehicles equipped with 2.0L GTDI engines whose PCM software had been reprogrammed as a part of recall 18V-735. The updated software calibrations for these subject vehicles were not properly installed by Ford at the time of production. Approximately one year after this RQ was opened, on September 25, 2024, Ford initiated a customer satisfaction program (24N07) for MY 2012-2018 Ford Focus vehicles equipped with the 2.0L GDI and GTDI engines to—as ODI learned during this investigation—address a different issue with the CPV from the primary focus of the safety recalls (18V-735 and 19V-515). Ford stated the CPV may not operate as intended in these vehicles. A failed CPV on its own merit, may cause drivability concerns such as engine hesitation, running rough, or stalling at low speed, which will be accompanied by an illuminated MIL. This program provides a one-time replacement of the CPV for vehicles with 15 years of service or less (with no mileage restriction). This coverage will automatically transfer to subsequent owners. It is to be noted that the customer satisfaction program being taken by Ford to address this RQ investigation results in a much different and significantly less severe problem than the safety action taken to remedy 18V-735 and 19V-515. ODI found no further issues with the combined scope and severity related to 18V-735 and 19V-515 therefore, ODI is closing this Recall Query. The agency reserves the right to take additional action if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
A Recall Query is a look at a recall that already exists — whether its remedy works, whether it reached every vehicle it should have, whether the manufacturer met its obligations. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one is closed. A recall query ends with NHTSA’s finding on the recall it examined — the remedy stands, is widened, or a new campaign follows; the file names the recall it concerned and NHTSA’s closing resume carries the reasoning.
Model years it names
Source: as NHTSA filed themAlso named on model years this site has no page for: 2012 Ford Focus; 2013 Ford Focus; 2014 Ford Focus; 2015 Ford Focus.
A vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs RQ23006 a recall?
No. A recall query is NHTSA asking questions, not a recall. A safety recall carries an NHTSA campaign number and a duty to repair for free; this one closed without one. Whether one particular vehicle has an open recall is a VIN question at nhtsa.gov/recalls.
Is RQ23006 still open?
No. It closed on Dec 20, 2024 without a recall.
Which vehicles does RQ23006 cover?
NHTSA opened it on 7 model years: 2018 Ford Focus, 2017 Ford Focus, 2016 Ford Focus, 2012 Ford Focus, 2013 Ford Focus, 2014 Ford Focus and more. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.