Toyota preliminary evaluation PE18005
Upper Steering Column Separation. NHTSA’s Office of Defects Investigation opened this preliminary evaluation about the column on 12 model years (2008–2013). Opened May 4, 2018, closed Nov 20, 2018 after 7 months without a recall. closed
What NHTSA says
Source: Office of Defects Investigation, as filedOn May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary. As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash. To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure. This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern. The VOQs associated with this investigation can be viewed at www. NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
A Preliminary Evaluation is the first formal stage: NHTSA has decided the complaints and other information it screened are worth a closer look, and asks the manufacturer for its own data on the condition. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one closed without a recall. That means NHTSA found no defect trend it chose to act on at the time, or the manufacturer addressed the condition another way (a service campaign or a bulletin, which have their own pages). A closed file can be reopened if new reports arrive.
Model years it names
Source: as NHTSA filed themAlso named: 2008 Toyota Highlander; 2009 Toyota Highlander; 2010 Toyota Highlander; 2011 Toyota Highlander; 2012 Toyota Highlander; 2013 Toyota Highlander; 2008 Toyota Highlander Hybrid; 2009 Toyota Highlander Hybrid; 2010 Toyota Highlander Hybrid; 2011 Toyota Highlander Hybrid; 2012 Toyota Highlander Hybrid; 2013 Toyota Highlander Hybrid.
A vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs PE18005 a recall?
No. A preliminary evaluation is NHTSA asking questions, not a recall. A safety recall carries an NHTSA campaign number and a duty to repair for free; this one closed without one. Whether one particular vehicle has an open recall is a VIN question at nhtsa.gov/recalls.
Is PE18005 still open?
No. It closed on Nov 20, 2018 without a recall.
Which vehicles does PE18005 cover?
NHTSA opened it on 12 model years: 2008 Toyota Highlander, 2009 Toyota Highlander, 2010 Toyota Highlander, 2011 Toyota Highlander, 2012 Toyota Highlander, 2013 Toyota Highlander and more. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.