Volkswagen engineering analysis EA18005
Seat Belt Webbing Failure. NHTSA’s Office of Defects Investigation opened this engineering analysis about the front on 1 model year (2018). Opened Jul 3, 2018, closed Feb 27, 2023 after 4.7 years. It led to safety recall 20V724000. became a recall
What NHTSA says
Source: Office of Defects Investigation, as filedIn December 2017, NHTSA conducted two (2) New Car Assessment Program (NCAP) tests on the Model Year (MY) 2018 Volkswagen (VW) Tiguan. Both tests were 35mph full frontal impacts into a rigid barrier with a 50th percentile male dummy seat-belted in the driver position and a 5th percentile female seat-belted in the right front passenger position. The tests were conducted on December 8, 2017, at MGA Research Corp. (MGA) in Wisconsin and December 13, 2017, at the Transportation Research Center (TRC) of Ohio. During both crash tests, the driver seat belt webbing completely separated at the point where the webbing loops through the Crash Locking Tongue (CLT). In both NCAP tests, the dummy injury criteria requirements, as set forth in Federal Motor Vehicle Safety Standard (FMVSS) 208, were met with one exception. The chest deceleration G force requirement was exceeded in the test conducted at TRC. The FMVSS 208 injury criteria requirement for the chest deceleration is 60 Gs and it was measured at 67 Gs in the test conducted at TRC. It should be noted, FMVSS 208 does not include a requirement that the seat belt webbing remain intact during a frontal collision to comply with the standard. Compliance with the standard is based on the dummy injury criteria. Further, the Agency has conducted NCAP testing with no substantial protocol changes for over forty (40) years. This includes tests conducted prior and subsequent to the subject NCAP tests. During that time there has not been a similar failure of the seat belt webbing in any other NCAP tested vehicle manufactured by VW or another manufacturer. In November 2020, VW filed a defect notice (20V-724/69BH) that recalled seat belt systems, both driver, and front passenger, that were manufactured with webbing from the same lot as the two NCAP tested MY2018 Tiguan vehicles. VW has tested and inspected several of the returned seat belt systems and found no anomalies in either the webbing or the CLT that would substantially affect system performance in a frontal collision. The Office of Defects Investigation (ODI) estimates that between 2000 and 3500 frontal collisions involving MY2018 VW Tiguan vehicles have occurred in the field during the time these vehicles have been in service. This estimate is based on vehicle population and an estimated yearly rate of severe frontal collisions. A severe frontal collision is defined, in this instance, as being of sufficient severity to warrant a commanded deployment of the frontal air bags. These collisions would place a significant load on the seat belt system similar to loads experienced during the NCAP tests. To date, neither ODI nor VW is aware of any frontal collision in the field that resulted in separation of the seat belt webbing. ODI believes that had any field collisions involved separation of the seat belt webbing, the Agency would have been notified. In view of the recall being conducted by VW, and lack of field data demonstrating a system defect, ODI is closing this Engineering Analysis (EA). The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances.
A Engineering Analysis is the deeper stage, usually upgraded from a Preliminary Evaluation: NHTSA tests, requests engineering documents and decides whether a safety defect exists. The summary is the agency’s own text from its investigation file, unedited; the opening and closing resumes with the full reasoning are on NHTSA’s site under this number.
What this means for an owner
Source: and what happens nextAn investigation is not a finding that a defect exists, and it puts no duty on anyone. NHTSA opens a Preliminary Evaluation when complaints and other reports suggest a condition worth asking the manufacturer about; it upgrades to an Engineering Analysis when the answers warrant testing; it closes either when it recommends a recall, when the manufacturer recalls on its own, or when no defect trend is found. The agency’s own goals are about four months for a petition, eight for a Preliminary Evaluation or a Recall Query and eighteen for an Engineering Analysis; many run longer.
This one became a recall. The campaign page carries the manufacturer’s filed defect, risk and remedy, the build window and every model year covered; whether one specific vehicle is included is settled by VIN at nhtsa.gov/recalls.
Model years it names
Source: as NHTSA filed themA vehicle page’s investigation list carries the same action; a name here is the scope NHTSA opened, not a list of affected VINs.
Common questions
Source: NHTSA Office of Defects InvestigationIs EA18005 a recall?
No — it is the investigation that led to one. Recall 20V724000 is the campaign; its page carries the remedy.
Is EA18005 still open?
No. It closed on Feb 27, 2023 and led to recall 20V724000.
Which vehicles does EA18005 cover?
NHTSA opened it on 1 model year: 2018 Volkswagen Tiguan. That is the scope of the inquiry, not a list of affected vehicles; a recall, if one follows, defines its own population by VIN.