C00A6
3 owner reports and 35 manufacturer filings across 4 model years from Ford, Lincoln.
Where C00A6 shows up
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports | Parts |
|---|---|---|---|---|
| 2020 Ford Explorer | Electrical System | 10 | 3 | Battery → |
| 2020 Lincoln Aviator | Power Train | 9 | — | |
| 2021 Ford Explorer | Power Train | 8 | — | |
| 2021 Lincoln Aviator | Power Train | 8 | — |
A model year appears here because the code is named in its record, not because every one of these vehicles sets it. Counts are mentions in the federal files, not failure rates — nobody publishes the denominator.
Affiliate disclosure: some links on this page are affiliate links. If you request a quote or buy through them we may earn a commission at no extra cost to you. Nothing on this page changes because of it.
What it gets filed under
What owners said
Source: NHTSA complaint databaseOwners’ own words, one per nameplate, scrubbed of anything identifying. These are unverified reports filed with NHTSA — they are what was said, not a finding that it was true.
Illuminated powertrain malfunction (wrench) indicator with DTCs C00A6 and C0631, caused by failure of the front axle disconnect actuator/intermediate shaft on an AWD 2020 Explorer at 46,821 miles
35 manufacturer filings name C00A6. Start with what the maker wrote down.
A code names the test that failed, not the part. A bulletin that names it is often a diagnosis someone has already written down — quote its number at the service desk.
Manufacturer filings that name it
Source: NHTSA manufacturer communicationsService bulletins and campaigns whose filed summary names C00A6.
- TSB 23-2114 Service bulletin2023-04-06 · Power Train
- Some 2020-2021 Explorer/Aviator vehicles equipped with all-wheel drive (AWD) built on or before 30-Aug-2021 may exhibit an illuminated powertrain malfunction (wrench) indicator with diagnostic trouble codes (DTC) C00A6 and/or C0631. This may be due to the front axle disconnect actuator/intermediate shaft. To correct the condition, follow the Service Procedure to replace the front axle disconnect a
- SSM 50504 Service bulletin2022-02-17 · Electrical System
- Some 2020-2022 Explorer/Aviator vehicles equipped with all-wheel drive (AWD) may exhibit an illuminated stability-traction control and/or powertrain malfunction warning indicators with diagnostic trouble codes (DTCs) C00A8:11, C00A8:13, C00A6:71, C00A6:74, and C00A6:99 present in the AWD module. This may be due to a damaged wiring harness rubbing against the underbody heat shield where it routes o
- TSB 21-2270 Service bulletin2021-08-16 · Electrical System
- Some 2020 Explorer/Aviator/Police Interceptor Utility vehicles equipped with all wheel drive (AWD) built on or before 20-Mar-2020 may exhibit various warning/fault messages with diagnostic trouble codes (DTCs) C0633 and/or C00A6:07 stored in the AWD module. This may be caused by an oil contaminated front halfshaft speed sensor. To correct the condition, follow the Service Procedure step to replace
- SSM 49669 Service bulletin2021-03-16 · Power Train
- 2020-2021 Explorer/Aviator vehicles equipped with all-wheel drive (AWD) may exhibit an illuminated AWD indicator with diagnostic trouble code (DTC) C00A6:07, C00A6:18, C00A6:19, C00A6:4B, C00A6:66, C00A6:71, C00A6:74, and/or C00A6:99. It may not be necessary to replace the transfer case clutch actuator. Follow the updated transfer case clutch actuator Pinpoint Tests in the Workshop Manual (WSM), S
What C00A6 means
Source: SAE J2012 / OBD-IIC00A6 sits in the generic range of the OBD-II standard, so it means the same thing on every vehicle sold in the United States — but WhichTrim does not carry a definition for it and will not invent one. What is on this page is the record: who named it and on what.
A stored code names the test that failed, never the part that caused it. It is the starting point of a diagnosis, not its conclusion — the same code has several possible causes and the cheap one is not always right.
Common questions about C00A6
Source: NHTSA files and the OBD-II standardCan I keep driving with C00A6 stored?
Nobody can answer that from the code alone, and a site that does is guessing. A steady light means a fault was logged and the car should be checked soon; a flashing light means a severe misfire — slow down and get it seen as soon as possible, because severe misfire can quickly damage the catalytic converter. The safe read of this page is the mileage and the components, not permission.
Does a code mean the car is recalled?
No. Recalls are filed by campaign and matched by VIN, and none of them are triggered by a scan tool. If you want to know whether an open recall applies to one specific vehicle, check the VIN at nhtsa.gov/recalls — that is the only source that settles it.
Why do the counts here differ from other sites?
Because these are not estimates. Every number on this page is a count of documents in NHTSA's own files: manufacturer communications that name the code in their filed summary, and owner complaints that name it in the narrative. We do not model, weight or extrapolate them.
Will clearing the code fix it?
Clearing turns the light off and erases the freeze-frame data a technician would have used to work out what happened. If the condition is still there the code returns, usually within a few drive cycles, and the diagnosis now starts from less information than before.