⌘K
Federal filingsHome›Bulletins›Terex› PN738
Manufacturer communication · Warranty extension

Terex warranty extension PN738

What it saysWarranty campaign to apply the correct Lazer product decals to conform with FDA requirements for labeling laser products. NHTSA’s full summary ↓

Terex filed this with NHTSA as a warranty extension dated Nov 5, 2026 — 1 document under this number: PN738 Owner Letter. It names 4 model years (2023–2025). A warranty extension is not a safety recall — there is no NHTSA campaign number and no federal requirement — but it is usually work the manufacturer pays for on the vehicles it names; the dealer checks the VIN against the manufacturer’s list.

What the bulletin says

Source: NHTSA's summary of the manufacturer's communication

Warranty campaign to apply the correct Lazer product decals to conform with FDA requirements for labeling laser products. Products had labels with a higher danger classification than actual. They were incorrectly listed as Class IV when they are actually Class I as built and to certify they are in compliance with Class I systems. Products installed on include various years prior to June 2025 on aerials HR50, HRM, TL41, LT40, TCX60, TL60, and HR55

One of the 442 warranty extensions and special-coverage programs on file — every make, with the term each runs to.

Manufacturer campaign id PN738 Kind Warranty extension Manufacturer date Nov 5, 2026 Received by NHTSA Nov 5, 2026 Components —

Document filed under this number

DocumentKindDatedNHTSA idAt NHTSA
PN738 Owner LetterWarranty extensionNov 5, 202611039347PDF, 134 KB

The summary is NHTSA’s abstract of the document, as filed under 49 CFR 579.5. One communication is usually filed as several documents — the bulletin, a dealer notice, an owner letter — and the number on any of them finds this page. A PDF link is shown only once NHTSA’s own server has been seen to serve that document; the rest are checked over the following nights. Quote the number at a service desk; it is what the dealer’s system is keyed on.

Model years it names

Source: as the manufacturer filed them

Also filed against: 2025 Terex LT-Series; 2023 Terex TL-Series; 2024 Terex TL-Series; 2025 Terex TL-Series.

None of these model years has a page on this site (it covers EPA-certified cars, trucks and SUVs from 2016), so the bulletin is listed here on its own.

Quote the number at the service desk. It is what the dealer’s system is keyed on.

Every manufacturer communication NHTSA holds for Terex, by the number printed on the letter.

Photo: Christian Buehner / Unsplash

Common questions

Source: NHTSA, 49 CFR 579.5

Is Terex PN738 a recall?

No. A warranty extension is a manufacturer communication filed with NHTSA under 49 CFR 579.5; a safety recall carries an NHTSA campaign number (two digits, a letter, six digits) and a federal duty to repair for free. Check the vehicle’s recalls by VIN at nhtsa.gov/recalls.

Is the PN738 repair free?

A warranty extension is usually paid by the manufacturer on the vehicles it names, within the terms and time limit the document sets; the dealer checks the VIN against the manufacturer’s list.

Which vehicles does PN738 cover?

The manufacturer filed it against 4 model years: 2025 Terex LT-Series, 2023 Terex TL-Series, 2024 Terex TL-Series, 2025 Terex TL-Series. Whether one particular vehicle is affected is a matter of its VIN and its build, not its model year alone.