P0108 on Ford vehicles Manifold absolute pressure sensor signal too high
P0108 is named on 6 Ford model years (2018–2019): 18 manufacturer filings and 0 owner reports in NHTSA’s files, across Explorer, Flex, Taurus.
Which Ford model years name P0108
Source: NHTSA manufacturer communications and complaints| Model year | Filed under | Bulletins | Owner reports |
|---|---|---|---|
| 2019 Ford Explorer | Engine | 3 | — |
| 2019 Ford Flex | Engine | 3 | — |
| 2019 Ford Taurus | Engine | 3 | — |
| 2018 Ford Explorer | Engine | 3 | — |
| 2018 Ford Flex | Engine | 3 | — |
| 2018 Ford Taurus | Engine | 3 | — |
A model year is listed because the code is named in its own record — a bulletin filed against it, or an owner’s complaint about it — not because every one of these vehicles sets it. Counts are documents in NHTSA’s files, not failure rates.
Ford filings that name P0108
Source: NHTSA manufacturer communicationsBulletins and campaigns Ford filed with NHTSA whose summary names P0108. Quote the document number at the service desk — it is a diagnosis the maker has already written down.
- TSB 19-2183 Service bulletin2019-06-05 · Engine And Engine Cooling
- Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressu
- TSB-2212 Service bulletin2019-07-03 · Engine And Engine Cooling
- Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressu
- TSB 19-2212 Service bulletin2019-07-03 · Engine And Engine Cooling
- Some 2018-2019 Explorer/Flex/Taurus/MKT vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL), powertrain malfunction (wrench) lamp, Service AdvanceTrac message, Hill Start Assist Not Available message, and/or lack of power with diagnostic trouble codes (DTCs) P0107, P0108 and/or P0109 present. This may be due to a faulty manifold absolute pressu
What P0108 means
Source: SAE J2012 / OBD-IIManifold absolute pressure sensor signal too high.
A stored code names the test that failed, never the part that caused it. The record above is what Ford and its owners have filed about it; the code’s page across every make has the whole file.
Common questions
Source: NHTSA files and the OBD-II standardIs P0108 a known problem on Ford vehicles?
It is a documented one: NHTSA's files hold 18 manufacturer filings and 0 owner reports naming P0108 on 6 Ford model years (2018–2019). Whether it is a problem on one particular car is a diagnosis, not a count — but a bulletin that names the code on your model year is the place to start.
Which Ford models does P0108 appear on most?
2019 Explorer (3 documents), 2018 Explorer (3 documents), 2019 Flex (3 documents).
Does P0108 on a Ford mean it is recalled?
No. Recalls are filed by campaign and matched by VIN; no recall is triggered by a scan tool. Check the VIN at nhtsa.gov/recalls, or open the model year's page here for the campaigns filed against it.