smart bulletin LI35.30-P-058566
smart filed this with NHTSA as a service bulletin dated Jul 14, 2026, about the power train. It names 4 model years (2016–2019). A service bulletin is not a safety recall: it is the manufacturer telling its dealers how to diagnose or repair a condition, and whether the work is paid for depends on the warranty in force. Quoting the number at a service desk can save a diagnosis.
What the bulletin says
Source: NHTSA's summary of the manufacturer's communicationSingle throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). The noise is heard once in each instance when changing direction of travel. Note: Sound file in attachment Cause If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to cracking of the microweld between the wheel bearing inner race and the joint housing of the side shaft. Note: The collar nut must always be replaced after being loosened. See also LI33.20-P-078406 Remedy Coat contact surface of side shaft with wheel bearing with Molykote paint. To do this, proceed as follows: 1. Remove side shafts 2. Clean contact surface A (see image file in attachment "Outer joint housing before") before coating with Molykote, using "spirit" (free of dust and grease) 3. Coat contact surface A (see image file in attachment "Outer joint housing after") with Molykote and leave to dry for "one hour" in removed condition 4. Reinstall side shafts Note: Before using the antifriction coating (Molykote), stir it or shake it thoroughly for (at least 1 minute).
Document filed under this number
| Document | Kind | Dated | NHTSA id | At NHTSA |
|---|---|---|---|---|
| LI35.30-P-058566 | Service bulletin | Jul 14, 2026 | 11035005 | not yet checked |
The summary is NHTSA’s abstract of the document, as filed under 49 CFR 579.5. One communication is usually filed as several documents — the bulletin, a dealer notice, an owner letter — and the number on any of them finds this page. A PDF link is shown only once NHTSA’s own server has been seen to serve that document; the rest are checked over the following nights. Quote the number at a service desk; it is what the dealer’s system is keyed on.
Model years it names
Source: as the manufacturer filed themA vehicle page’s bulletin list shows the newest few communications filed against that model year; the count there is every one.
Common questions
Source: NHTSA, 49 CFR 579.5Is smart LI35.30-P-058566 a recall?
No. A service bulletin is a manufacturer communication filed with NHTSA under 49 CFR 579.5; a safety recall carries an NHTSA campaign number (two digits, a letter, six digits) and a federal duty to repair for free. Check the vehicle’s recalls by VIN at nhtsa.gov/recalls, or on its page here.
Is the LI35.30-P-058566 repair free?
Not automatically. A service bulletin describes how to diagnose or repair a condition; who pays depends on the warranty in force, any extension, and the dealer. Quoting the number can save a diagnosis either way.
Which vehicles does LI35.30-P-058566 cover?
The manufacturer filed it against 4 model years: 2019 smart fortwo, 2018 smart fortwo, 2017 smart fortwo, 2016 smart fortwo. Whether one particular vehicle is affected is a matter of its VIN and its build, not its model year alone.