⌘K
HomeBulletinssmart LI33.30-P-056665
Manufacturer communication · Service bulletin

smart bulletin LI33.30-P-056665

smart filed this with NHTSA as a service bulletin dated May 21, 2025, received Jun 3, 2025, about the power train. It names 4 model years (2016–2019). A service bulletin is not a safety recall: it is the manufacturer telling its dealers how to diagnose or repair a condition, and whether the work is paid for depends on the warranty in force. Quoting the number at a service desk can save a diagnosis.

What the bulletin says

Source: NHTSA's summary of the manufacturer's communication

Complaint Single throttle lift-off clunking noise from the side shaft when moving off (audible at the outboard end). The clunk is heard once when changing from forward to reverse (and vice versa). Note: Sound file in attachment Cause If the complaint is eliminated by experimentally loosening the outboard collar nut (by 1 turn), the problem is due to micromovement in the connection between the wheel bearing inner race and the joint housing of the side shaft. Note: The collar nut must always be replaced after being loosened and must be tightened to the specified torque. Remedy Coat contact surface of side shaft with wheel bearing with Molykote paint. To do this, proceed as follows: 1. Remove outboard side shafts (extract outer joint gearing from wheel hub) 2. Clean contact surface A (see image file in attachment "Outer joint housing before") before coating with Molykote, using "spirit" (free of dust and grease) 3. Coat contact surface A (see image file in attachment "Outer joint housing after") using Molykote and leave to dry for one hour in removed condition 4. Reinstall side shafts

Kind Service bulletin Manufacturer date May 21, 2025 Received by NHTSA Jun 3, 2025 Components Power Train

Document filed under this number

DocumentKindDatedNHTSA idAt NHTSA
LI33.30-P-056665Service bulletinMay 21, 202511019018not yet checked

The summary is NHTSA’s abstract of the document, as filed under 49 CFR 579.5. One communication is usually filed as several documents — the bulletin, a dealer notice, an owner letter — and the number on any of them finds this page. A PDF link is shown only once NHTSA’s own server has been seen to serve that document; the rest are checked over the following nights. Quote the number at a service desk; it is what the dealer’s system is keyed on.

Model years it names

Source: as the manufacturer filed them

A vehicle page’s bulletin list shows the newest few communications filed against that model year; the count there is every one.

Common questions

Source: NHTSA, 49 CFR 579.5

Is smart LI33.30-P-056665 a recall?

No. A service bulletin is a manufacturer communication filed with NHTSA under 49 CFR 579.5; a safety recall carries an NHTSA campaign number (two digits, a letter, six digits) and a federal duty to repair for free. Check the vehicle’s recalls by VIN at nhtsa.gov/recalls, or on its page here.

Is the LI33.30-P-056665 repair free?

Not automatically. A service bulletin describes how to diagnose or repair a condition; who pays depends on the warranty in force, any extension, and the dealer. Quoting the number can save a diagnosis either way.

Which vehicles does LI33.30-P-056665 cover?

The manufacturer filed it against 4 model years: 2019 smart fortwo, 2018 smart fortwo, 2017 smart fortwo, 2016 smart fortwo. Whether one particular vehicle is affected is a matter of its VIN and its build, not its model year alone.